Search: NSub

Posted: 27 August 2015Last Updated: 27 August 2015
Hi, just a quick one. I'm getting a Snait2. My nsub cable has a din connector which I previously plugged into my Hicap. Question is will I be able to plug my Nsub into either the "pre amp out" or the "bi amp" sockets on the Snait. Or, will I have to...
Posted: 12 August 2015Last Updated: 14 August 2015
  1)Is it as simple as connecting green electrical copper wire between the two ground terminals and switching to external? 2)If yes,  what will be the earthing switch position on the DAC? (I have had custom run  isolated power line...
Posted: 05 August 2015Last Updated: 10 August 2015
My nSub is connected to PSU of 252 by Naim 2xRCA to Din cable. I suddenly get horrible hum through SL2 speakers even if the sub power is off. Only unplugging the nSub powerline will stop the hum.  Any idea what is it about?  Two  two...
Posted: 24 January 2013Last Updated: 25 January 2013
As far as I know nSub has two high-level inputs (L and R). Can somebody tell me if I can connect nSub to the high output of NAP500?
Posted: 14 April 2011Last Updated: 14 April 2011
Having some problems; I expected my new (s/h) nSUB to be subtle but not quite this silent! System is UnitiQute/nSat/nSub. I have the Qute set to loudspeakers 'small'. I have two short pieces of ordinary double wire electrical...
Posted: 10 March 2011Last Updated: 13 March 2011
Hi fellow Naim'a'philes. I recently purchased a Second hand Nsub. Its a beautiful unit. Problem is that I am not sure if it is working correctly. This is the first non floor firing sub I have used. I am used to Rels and recently a Rel T5. I know that...
Posted: 04 November 2010Last Updated: 07 November 2010
I am looking ta upgrading my sub, any views of the nSub in comparison to others ?I am looking at the Cremona Sonus Faber, Rel Stentor III, Velodyne DD15.I have Sonus Faber speakers all round and use a SF Gravis currentlyAlso curious to see about using...
Posted: 02 October 2010Last Updated: 04 October 2010
Hi all,I'm really perplexed about the missing nSUB sound in my setup. My system is now:nVinDAC282+non-Naim PSU250.2nSYSTEM speakersI'm quite confused, because I don't really understand the nSUB manual nor the nVi manual. I am connecting the nSUB to...
Posted: 27 July 2010Last Updated: 27 July 2010
Is it available?
Posted: 02 April 2010Last Updated: 07 April 2010
I have recently purchased an nSub and am somewhat confused as to how I should connect it to my SuperNait/HiCap combo. Also, which input(s) should I use on the nSub?Thanks in advance.Rgds,Lars
Posted: 18 July 2008Last Updated: 17 August 2008
So, after a seemingly endless seven week wait between placing the order and finally talking delivery, I eagerly unpacked my new nSub..... ...and then realized that either my dealer had ordered the wrong cable or the wrong cable had been sent with the...
Posted: 10 February 2007Last Updated: 10 February 2007
Has anyone got any tips regarding the placement of the Nsub, the book recommends 10cm away from wall.System:200/202 driving a pair of Nsats and sub.Objective is to try to remove some of the boominess,should I bring it further away from the wall?thanksPaul
Posted: 22 December 2006Last Updated: 22 December 2006
I have two front nSats, an nCent and an nSub connected to an nVi. I was getting some low level hum from the nSub and switched it to external earth although I do not have an earth wire from the nsub to the nVi. The nVi is earthed through the power...
Posted: 03 April 2006Last Updated: 03 April 2006
Hello to the forum members, I'm new to the forum but my relations with Naim started 22 years ago with the first Nait. Since then I upgraded the system several times and present system comprises the following: cds1( new transport & new black Burndy - hi-line will soon be ordered ),Nac 202(soon to be replaced by ordered Nac 282)/Napsc/HiCap/Nap 200),LP12/Geddon/Prefix/Flatcap, Nat 03, Sonus Faber Grand Piano speakers.The next items will follow: Fraim + N-vi + surround speakers and finally...
Posted: 27 March 2006Last Updated: 27 March 2006
Hi,Calling on users of nSub in HiFi set-up!What parameters do you use? Specifically the cut-off frequency and the gain.Could you also specify what speakers you use and how you position your nSub in the room (i.e. between speakers, along sidewalls ...