System Automation
Posted by: Big Jo on 15 February 2012
Morning all,
Thought I would share my experience with system automation, I think I have found something interesting, but doubt most of you don't already know. I remember a post about a gentleman struggling to get system automation working on his new 252.
Well, as soon as I got my NDX "bedded in" I wanted to setup system automation from my iPad 2, after being a spanner and ordering a 3.5mm to 3.5mm stereo jack cable, to then find out that my NAC202 uses an RCA for that, I then rummaged around and found a Chord iChord 3.5mm to RCA, plugged this in with only the left plug connected to the 202, set it up in the NDX to control a pre, and bingo, all worked a treat.
Obviously an iChord for system automation is daft given the cost and function, so I ordered and cheapie from eBay, replaced the iChord, and it worked "initially" but found it really sluggish, and completely unresponsive at times. I left the cable in for a couple of days, and the same thing, slow and at times didn't work at all, so have now gone back to the iChord.
I've ordered a mono 3.5mm to RCA, again a cheapie from eBay, and will see what that does, but thought I would share my thoughts.
Kind regards
Jo