Time Display

Posted by: Wheretonow on 25 March 2015

I have recently joined the Naim fraternity - 4 weeks ago - with a Uniti 2.  For several weeks the time display showed correct time in sydney (aus) AEDT. Then it fell back one hour.  There has been no change to daylight saving etc.  The Uniti displays in settings (clock and alarm) 10 hrs ahead of GMT.  I have read many comments from people about daylight saving issues etc to no avail.  When I try to adjust (in change Time Zone) to +11 or in fact any other, the change does not hold.  the uniti always reverts to a flashing +- 10.  In advanced settings there are two time servers.  Selecting either has no effect.  I have tried switching off the equipment without effect.

I do not think there is a network problem.  I am wirelessly connected and have no issue with internet radio.  I have wirelessly connected to the one router, a Mac computer, Ipad, air printer and the Uniti 2. Is this at all significant.  Note, no problem in using the Naim app for selecting function, volume etc.

 

Can anyone make a suggestion before I return unit to shop (140 Kms away) as advised by retailer?

 

 

Posted on: 20 July 2015 by MartinKocurek

Hi Phil, are there any plans to introduce time on NDX in the future?

Posted on: 20 July 2015 by Phil Harris
Originally Posted by MartinKocurek:

Hi Phil, are there any plans to introduce time on NDX in the future?

 

No - there are no plans to introduce time and alarms on the ND5XS / NDX / NDS as it's not appropriate for those products..

 

Phil

Posted on: 20 July 2015 by TomSAMU
Initially not, but now I did! And it worked! THX!
Originally Posted by Phil Harris:
Originally Posted by TomSAMU:

I still have the same problem with the clock... but after an update today, which didn't change anything, I found myself a solution which works for me: Settings>Front Display>Show Clock>off.

 

Greetings from Luxembourg.

 

Hi,

 

After doing the 4.3 update did you do a Tools -> Factory Settings -> Reset All Settings from the IR remote?

 

Cheers

 

Phil

 

Posted on: 07 September 2015 by patoperro

I have a UnitiQute and was also affected by the time bug. I did a factory reset which didn't fix it, but did delete all of my iRadio presets!

Anyway, I just applied the 4.3 update and am now pleased to say the time is fetched from the interpipes once again. The problem is that the time zone is incorrect (I am GMT +1): 

 

When resyncing the time, one is instructed to use the Adjust Time Zone option:

 

I can't find it anywhere in the menu, however.

 

Can someone please help me out? 

 

Thanks,

Doug

 

Posted on: 07 September 2015 by Phil Harris
Originally Posted by patoperro:

I have a UnitiQute and was also affected by the time bug. I did a factory reset which didn't fix it, but did delete all of my iRadio presets!

Anyway, I just applied the 4.3 update and am now pleased to say the time is fetched from the interpipes once again. The problem is that the time zone is incorrect (I am GMT +1): 

 

When resyncing the time, one is instructed to use the Adjust Time Zone option:

 

I can't find it anywhere in the menu, however.

 

Can someone please help me out? 

 

Thanks,

Doug

 

 

The "Adjust Time Zone" option is removed if you have used the app to manage the clock time.

 

To reinstate the "Adjust Time Zone" option simply do a factory reset on your unit.

 

Best Regards

 

Phil Harris 

Posted on: 07 September 2015 by patoperro
Originally Posted by Phil Harris:
Originally Posted by patoperro:

I have a UnitiQute and was also affected by the time bug. I did a factory reset which didn't fix it, but did delete all of my iRadio presets!

Anyway, I just applied the 4.3 update and am now pleased to say the time is fetched from the interpipes once again. The problem is that the time zone is incorrect (I am GMT +1): 

 

When resyncing the time, one is instructed to use the Adjust Time Zone option

 

I can't find it anywhere in the menu, however.

 

Can someone please help me out? 

 

Thanks,

Doug

 

 

The "Adjust Time Zone" option is removed if you have used the app to manage the clock time.

 

To reinstate the "Adjust Time Zone" option simply do a factory reset on your unit.

 

Best Regards

 

Phil Harris 

To my knowledge, I haven't used that option in the mobile app; can't even find it, in fact.

 

"Simply" resetting the unit means losing all my iRadio presents... again. It takes hours to search for and note down all 40 odd channels. Echoing what someone else already posted, why user settings (such as presets) aren't stored separately from system settings is beyond all understanding. 

 

Also, why can't you make setting the time zone an option in the firmware update?

 

Screw it, just turning the clock off. This is just one bad joke, and for the kind of money I've spent, not a very funny one.

Posted on: 07 September 2015 by Willard McCarty
Immediately after applying the latest firmware upgrade, the displayed time on my UnitiQute 2 became the current time, BST. I did nothing to indicate my location (London). Now I am hoping that when we go back to GMT the time will change back as well.
 
I find it curious that I continue to care so much about correct display of the time. I guess the correct time says to me "everything is working as it should".
 
But I still cannot get my logo to respond to touch. Any ideas?
 
Thanks.
 
Yours,
WM
 
Originally Posted by patoperro:
Originally Posted by Phil Harris:
Originally Posted by patoperro:

I have a UnitiQute and was also affected by the time bug. I did a factory reset which didn't fix it, but did delete all of my iRadio presets!

Anyway, I just applied the 4.3 update and am now pleased to say the time is fetched from the interpipes once again. The problem is that the time zone is incorrect (I am GMT +1): 

 

When resyncing the time, one is instructed to use the Adjust Time Zone option

 

I can't find it anywhere in the menu, however.

 

Can someone please help me out? 

 

Thanks,

Doug

 

 

The "Adjust Time Zone" option is removed if you have used the app to manage the clock time.

 

To reinstate the "Adjust Time Zone" option simply do a factory reset on your unit.

 

Best Regards

 

Phil Harris 

To my knowledge, I haven't used that option in the mobile app; can't even find it, in fact.

 

"Simply" resetting the unit means losing all my iRadio presents... again. It takes hours to search for and note down all 40 odd channels. Echoing what someone else already posted, why user settings (such as presets) aren't stored separately from system settings is beyond all understanding. 

 

Also, why can't you make setting the time zone an option in the firmware update?

 

Screw it, just turning the clock off. This is just one bad joke, and for the kind of money I've spent, not a very funny one.

 

Posted on: 07 September 2015 by bicela
Originally Posted by Phil Harris:
Originally Posted by patoperro:

I have a UnitiQute and was also affected by the time bug. I did a factory reset which didn't fix it, but did delete all of my iRadio presets!

Anyway, I just applied the 4.3 update and am now pleased to say the time is fetched from the interpipes once again. The problem is that the time zone is incorrect (I am GMT +1): 

 

When resyncing the time, one is instructed to use the Adjust Time Zone option:

 

I can't find it anywhere in the menu, however.

 

Can someone please help me out? 

 

Thanks,

Doug

 

 

The "Adjust Time Zone" option is removed if you have used the app to manage the clock time.

 

To reinstate the "Adjust Time Zone" option simply do a factory reset on your unit.

 

Best Regards

 

Phil Harris 

Hi Phil, why anyway the clock shows this strange time offset?

Posted on: 08 September 2015 by Phil Harris
Originally Posted by bicela: 

Hi Phil, why anyway the clock shows this strange time offset?

 

Hi,

 

The app can apply an offset with 'minute' resolution if the time on the device that the app is running on is not absolutely accurate... 

 

Phil