NDX Automation

Its all in the manual in section 4.9

You just need a 3.5 to 3.5 jack cable - any TV/AV store has them or www store,  cost is minimal & there is no need to go mad with quality as it has no effect on SQ

Connect that between the NDX/ Remote Out socket & the Remote In socket of the Supernait.

Set the system automation (& as you don't have a remote) with the front panel buttons

- Hold down the "OK/List" button

- Set Up > System Automation (9/10) > Preamp (1/5) > Yes

- enable System Automation on the iPad app & bingo !!!!

Thanks guys, that's really useful. I have been through the (online) manual but couldn't find how to get into the menu from the front panel - thought I'd tried holding down ok/ list but clearly not.

I've already attached a cheap 3.5mm cable as figured this would not need to be anything fancy.

Thanks again.

Thanks guys, volume control working a treat - just managed to get drivers working for usb to serial cable and 4.3 update happening now - on a roll!!!!

After all this, I think I am swinging towards a new unit rather than the 2011 demo unit.

Maybe I can charge the dealer for the work i've done on his unit 

Harty601, as you seem to have resolved your issue, I wonder if I could use your thread to pose another   question in the same vein and so as not to add another thread?

When I initially set up my automation on my NDX/202 if my input had been changed to AV (or other input) on the preamp, as soon as I selected upnp in the Naim app it would select the correct input of AUX1 and play track. Now after previous firmware updates I have had to reset the automation, hiding unused inputs renaming etc etc, but can you suggest what I have missed as when I now select upnp there is no change to inputs on the 202.

Thanks in advance

And sorry again if this is perceived as a hijack

Hi Maccaa, 

I had a similar issue as I've hijacked my CD player input for the NDX and my demo NDX kept switching to aux 1 on the supernait.

Within the automation menu you'll see line 3/5 - "input used - Aux 1*)  *in my case

Press OK on this line and you'll find all the inputs available - click on - Aux 1 (if that is the input you would like it to switch to.

I now find when I use the naim app, the input switches to my chosen CD input and everything works.

Hope this helps.

BTW

Preamp is : Enabled and streamer audio input is selected as AUX1 within automation, is there something to set in the app

Harty601, sorry our posts crossed 

Maybe I will deselect and then reselect.

Thanks

Maccaa

Yeah, sorry my response probably isn't much help given your last post.

Is volume control working through the app - as in the NDX is definitely talking to the 202?

Yep, everything else fine, volume functions through the amp/app.... I will have a play and report back.

Thanks

Still having problems , if I press any other option on the iPad i.e. spotify, usb, iRadio, it changes to the correct input, but does nothing when I press UPNP.

Any further thoughts?

I would guess the NDX is OK as it shows Spoti & iRadio,  however can the NDX find the UPnP (NAS) using the front panel buttons,  if not then its in that connection, not the app.    

Might be worth rebooting the NAS.  

If its ethernet wired & has a switch,  then turn the switch off & then on again 

&  .........  not wishing to insult,  but is the app UPnP input enabled ???   

Thanks for responding guys and sorry for the late reply I have been out of the country, Harty601 I have done the ctrl-alt-delete of the naim world and no luck.

Mike-B thanks, have rebooted NAS, and checked that the UPNP is enabled but all seems good in that world. Everything works from the app and on the panel buttons, just not that switch over to the correct input ;(

It's no major problem, I am sure if I got really bothered with it HQ would help if I rang them.

Thanks again for the ideas

Maccaa