Quadraspire
Posted by: dektop100 on 04 April 2017
I'm looking to properly site my various Naim boxes and Quadraspire looks like my kind of budget. Is it OK?
Simon Walker posted:Pcd posted:james n posted:Pcd posted:Hopefully you should get a picture??
JohnL posted:I too use two quadraspire bamboo racks on my naim active set up and am well happy with them.
James, can I ask what is the smaller rack you have there with the Nas and router on it ?
Thanks
John
Not mine John - just reposting PCD's picture which wasn't displaying in the original post.
James , thanks for sorting the picture have used this Quadraspire rack for a number of years adding the SVT upgrade last year when my new black box system was installed.
John, I made the small rack myself earlier this year the NAS and router were originally installed on the lower level of the rack but with an upgrade from a 250dr to a 300dr plus the Core I need the additional spaces.
As I had some spare uprights I used these along with the solid Oak timber as shown.The timber I found on the well known auction site at the size shown already prefinished just had to drill the holes and give them a treatment of Danish oil very pleased with the end result
Not to sure if the EE router needs the SVT upgrade though ??
James once again thanks for your help.
It's unclear from the photo but I assume the EE router and HDD etc are on a separate distribution block to the Naim or better still a different spur?
Simon
Naim fed from a Music Works Reflex Lite ,Router and other stuff from a Wireworld Matrix Block all from a separate spur.
Been using various Naim since 1983 never had any problems with mains noise, transformer hum etc must be lucky with my electricity supplier.
Pcd posted:Simon Walker posted:Pcd posted:james n posted:Pcd posted:Hopefully you should get a picture??
JohnL posted:I too use two quadraspire bamboo racks on my naim active set up and am well happy with them.
James, can I ask what is the smaller rack you have there with the Nas and router on it ?
Thanks
John
Not mine John - just reposting PCD's picture which wasn't displaying in the original post.
James , thanks for sorting the picture have used this Quadraspire rack for a number of years adding the SVT upgrade last year when my new black box system was installed.
John, I made the small rack myself earlier this year the NAS and router were originally installed on the lower level of the rack but with an upgrade from a 250dr to a 300dr plus the Core I need the additional spaces.
As I had some spare uprights I used these along with the solid Oak timber as shown.The timber I found on the well known auction site at the size shown already prefinished just had to drill the holes and give them a treatment of Danish oil very pleased with the end result
Not to sure if the EE router needs the SVT upgrade though ??
James once again thanks for your help.
It's unclear from the photo but I assume the EE router and HDD etc are on a separate distribution block to the Naim or better still a different spur?
Simon
Naim fed from a Music Works Reflex Lite ,Router and other stuff from a Wireworld Matrix Block all from a separate spur.
Been using various Naim since 1983 never had any problems with mains noise, transformer hum etc must be lucky with my electricity supplier.
Perfect solution sir, my favoured solution too.
Simon
Hungryhalibut posted:Easy to dust, doesn't go out of tune. Ideal if you are a little lazy.
HH you got the bronze upgrade for the top shelf, nice
What heights are the SVT shelves you ordered?
it's a nice looking system with only 3 boxes and 2 power cables.
analogmusic posted:Hungryhalibut posted:Easy to dust, doesn't go out of tune. Ideal if you are a little lazy.
HH you got the bronze upgrade for the top shelf, nice
What heights are the SVT shelves you ordered?
it's a nice looking system with only 3 boxes and 2 power cables.
The columns are 180mm. I think the 140mm versions look nicer but I needed to keep the din to XLR wire off the floor.