272 won’t power up after disconnecting burnby

checking out the addition of an xps2 to 272 streamer. When Burnby detached and original power cord re-attached to 272, the 272 will not power up. Does the burnby reset the     272 internally and if so, how to reverse?

Original Post
Petersfi posted:

checking out the addition of an xps2 to 272 streamer. When Burnby detached and original power cord re-attached to 272, the 272 will not power up. Does the burnby reset the     272 internally and if so, how to reverse?

I’m about to do the same comparison.

allowing everything to warm up nicely but in the meantime, would like to hear your initial thoughts!

Petersfi posted:

checking out the addition of an xps2 to 272 streamer. When Burnby detached and original power cord re-attached to 272, the 272 will not power up. Does the burnby reset the     272 internally and if so, how to reverse?


Not entirely sure how relevant this is to your problem, but when used with an XPS, the 272 draws all its power from it. It’s own power cable becomes redundant, and should be removed. 

GSR; i’ve Had the xps2 connected for a few weeks now; the best indicator that we have an improvement in sound quality is that my listening hours have doubled of late. Much more enjoyment out of the system. Considering swinging for the fences with an XPS dr despite my.vendor not having one to audition

Add Reply

×
×
×
×