Streaming Audio

SimonbPosted: 29 October 2018Last Updated: 29 October 2018
why does my muso keep switching from analogue, digital and radio whilst playing my tv through the speaker.
Timmo1341Posted: 24 October 2018Last Updated: 29 October 2018
Well, that’s a few hours of my life I won’t get back, but at least I’ve saved myself a whole bunch of cash! I spent most of yesterday experimenting with fancy (and very expensive) ethernet cables - Audioquest Vodka & Cinammon, Chord Epic, Shawline and and Tellurium Q Black Diamond. I have two of the fashionable Cisco 2960 switches, one in the lounge feeding my 272 and one in the study to which my UnitiServe is connected. The differences in SQ were, to put it mildly, so small as to be...
Naim_newbiePosted: 23 October 2018Last Updated: 29 October 2018
Hi, I've already opened a support ticket for this, but I am curious if there are other people who experience the same issue? Since a month or two, the volume slider in the Naim app always jumps back to the setting where it was when I opened the app. The volume on my Atom doesn't change with it, so the slider setting and the actual volume on the Atom are out of sync. I have to close and re-open the app to get the slider back in sync, but then that's the new setting where it will jump back to...
peter11Posted: 29 October 2018Last Updated: 29 October 2018
hi YES ive had tested the nova at home,,and just dont think its worth over the double money. but i would like a bit more power and scale to the atom anyone who runs this combo? how about the interconnects? looked at gothams rca-din 4,,,any good? speakers are acoustic energy ref 1 ,rel t5 sub , and chord carnival speakercables best regards// peter the swede
iburnellPosted: 28 October 2018Last Updated: 29 October 2018
My Muso seems to be working just fine but the white power and volume light are flashing on and off, I've tried removing and re-adding the Naim app. Powered off the Router and switch it is connected to to no avail. Also tried discovering room manually which does state the white flashing light should go out but nothing happens Thoughts?
stevedPosted: 25 October 2018Last Updated: 28 October 2018
I've recently bought a UnitiStar, my first venture into streaming. It is connected via wifi to a new VirginMedia Hub3. This morning, I had Radio2 on internetradio, but it was virtually unlistenable as it kept dropping out. It wasn't a problem with the wifi signal as far as I can tell, and all other iradio stations were fine, as was Tidal. There was a similar thread a year or so ago with people experiencing similar issues specifically with Radio2, and I wondered if there is anything I can do...
Jack911Posted: 09 September 2018Last Updated: 28 October 2018
Can someone explain the benefits of the HDMI upgrade for the Atom?
Kiwi JohnPosted: 24 October 2018Last Updated: 28 October 2018
Oops - First timer so input "body" under "Subject". I'm looking for recommendations regarding music library management software for ripped and streamed music. New to Naim - Core + Nova and would like to start loading to Core/NAS with logical management system.
iliriaPosted: 26 October 2018Last Updated: 27 October 2018
Today I unboxed the Star and set it up and wanted to ask a few questions about its functionality please: 1. Apart from the initial set up do I need to keep it hardwired to the router with ethernet cable? Does hardwiring improve sound? 2. Should I use the provided speaker plugs or other banana plugs will do fine? 3. Is there a way to turn Bluetooth off? 4. Is there a way to turn screen completely off? 5. How do I get the bidirectional function of the remote to work? 6. Is there supposed to be...
Bill_nycPosted: 26 October 2018Last Updated: 27 October 2018
Is Roon compatible with my UnitiServe (system version 1.7b)?
French RoosterPosted: 19 October 2018Last Updated: 27 October 2018
On the Nd555 impressions thread, Dark Bear found that 3 different rips from the same album, by 3 different softwares, sound different for him. I hope i make no mistake here in resuming his idea. Some members don’t agree with that, thinking or hearing no differences at all. Dark Bear found that the rips made by the melco 100 ripper sound the best. I am asking myself if the differences can be explained, if they really exist, by the quality of the cd drive mechanism. The one in the melco must...
Mike-BPosted: 13 October 2018Last Updated: 27 October 2018
iRadio / vTuner is a bit of a car crash this morning, All of the Naim's Choice stations are off & its slow to connect, slow to fill buffer, to all the other stations. Anyone else having the same ???
DinariusPosted: 26 October 2018Last Updated: 27 October 2018
Naim Uniti was working fine until an hour ago. I switched from CD to iRadio - no problem. I then used the remote to switch from the iRadio station to a DAB station. Nothing happened. The display read, "Please Wait". I tried an FM preset; same thing. "Please Wait". I then turned off the mains power for a couple of minutes and powered it back on. The display now read, "Fault 10", and I can't access anything, not even the CD and iRadio which were working. Any ideas? Thanks. D.
Timmo1341Posted: 20 October 2018Last Updated: 26 October 2018
Five years old, no problems save for a dud CMOS battery on motherboard 2 years ago. It’s the 2TB HDD version, and has ripped approx. 3,000 cds since new. Last night I went to insert a disc into the slot- the machine ‘grabbed’ it as usual, but failed to take it in completely. After about 30 seconds of unusual bursts of ticking the disc was ejected as normal. I tried a couple of other discs with the same result. I powered down and restarted, but symptoms remained the same. I tried the paper...
Andy76Posted: 26 October 2018Last Updated: 26 October 2018
Hi, wondering if anyone has a Naim streamer linked to an SN2 or XS2 amp via RC5 and is able to control the volume of the amp from within the Spotify app? I know you can do this within the Naim app itself. I ask as having got used to using the Naim Atom spotify and Chromecast audio this way, my next move is likley going to be to add an ND5 XS2 and SN2/XS2 and I'd like to keep this feature if possible. Guessing too soon for ND5 XX2 users to add in any thoughts but likewise would be interesting...
ManinblackPosted: 24 October 2018Last Updated: 26 October 2018
Have seen questions asked, so seemed worth posting. Have just added NAP100 to a UQ2. Wow, excellent upgrade. Used RCA to DIN. Speakers are old Celestion 12Si. Great combination. Upnp & Tidal sources.
Badlands78Posted: 16 October 2018Last Updated: 24 October 2018
Hi, I've Nova which replaced a UnitiLite last week and ND5 XS in another room, both using wired connections, and LIV Zen NAS. With the UnitiLite I never had any problems at all with NAS disappearing. Now the only way to get it back is to switch NAS off/on again each time. But as soon as I use Tidal or radio, its gone again, from both lite and nova. Any ideas at all please?
GregWPGibbsPosted: 20 September 2018Last Updated: 23 October 2018
Is it just me, or does the new Linn streamer range have (at the very least) a passing similarity with the Uniti range, not least the “innovative “ rotary volume control on the top of the player??
musicaPosted: 19 October 2018Last Updated: 23 October 2018
Hi This Post is not about hifi but I am hoping someone can help. My son has suffered a stroke and is going to be in hospital for some time. In the first hospital he could listen to internet radio and watch Sky tv using the sky go app. This I am sure helped him stay positive. He has now moved to another hospital wherehe still hasWi-Fi and can listen to Internet radio. He cannot however us the sky go app. He can log on to the app but when tries to run a program is says that the app requires...
alpha10Posted: 17 October 2018Last Updated: 23 October 2018
I really like my Uniti Star, but I have a few suggestions that should be implemented, you are welcome to post your own :) 1. Ability to set the display off (I don't need to see the screen at all when watching TV for example) 2. Ability to rip selected songs of a CD. 3. Ability to configure my Apple TV remote to the Uniti (it worked on the old Uniti, but not with the Star) I will post some more later...
Sloop John BPosted: 20 October 2018Last Updated: 23 October 2018
As I'm ripping on dBPoweramp, accurate rip has gone from 2 to 1 and now for the last disc, no accurate rip information and no metadata. I would have expected this data to be in the ether by now. It seems unusual that people would just have ripped some but not all CDs? .sjb
Nuno HerderPosted: 22 October 2018Last Updated: 23 October 2018
I have noticed that I have to turn the gain up a little more to achieve the same volume on my muso. Any other user noticed similar effect?
iliriaPosted: 21 October 2018Last Updated: 23 October 2018
Hi all. I am thinking about getting a Uniti Star since I rather enjoyed its sound when I had a demo. However I have a few questions before I pull the plug please. Hope you can help. Does Star offer sound quality which is just or at least almost as good as one of Naim's integrated amps in the similar price bracket? Can it drive a subwoofer as well (BK XXLS400)? Am I safe to buy an ex-display model (from a reputable seller) if it saves me quite a few hundreds? Can I get internet radio out of...
m.paul taylorPosted: 17 October 2018Last Updated: 22 October 2018
I have an ND555. I am told that DSD downloads are converted to PCM. Is there any improvement in SQ over FLAC files?
ken cPosted: 21 October 2018Last Updated: 22 October 2018
decided to get a new NAS drive for my music library and then I can use the ReadyNAS as a NAS for other data. I currently use UnitiServe/SSD to rip and to serve. I don't really want to change that right now. could you guys point me to a set of instructions on how to safely move my music files from ReadyNAS to the new Synology. many thanks enjoy/ken