Hi-Fi Corner

GhettoyoutPosted: 29 September 2017Last Updated: 02 October 2017
This week I rebuilt my 500 series kit from scratch after having the livingroom redecorated. It's quite a palver building two stacks taking into account best practice as regards box placement, cable dressing and the like. There's a bit of a sheen to the sound at the moment that I'm sure will go away when it all gets warmed up. But it got me thinking how much easier it would be if there was a 500 quality integrated amp out there. Four boxes down to one, a lot less cabling and fewer shelves on...
maxfPosted: 18 September 2017Last Updated: 02 October 2017
Hi all, I have enjoyed my system for about 4 years and think I have the upgrade bug now and was wondering what the forum would recommend. I have Nac 172, Nap 250.2 and B&W 805d speakers. I really enjoy the speakers and power amp, and it's clearly the front end which is the weakest part of my system, although I still think it sounds really great. I didn't think about the upgrade path especially carefully when I bought the n172, as I am now in the position of 'needing' to buy a new...
chapPosted: 27 September 2017Last Updated: 02 October 2017
Hello all I'm wondering if it's worth investing in a NAP 100 to partner my UnitiQute2. The shop I bought it from said they didn't think it was worth it, but I've noticed that a lot of people combine the two. Your thoughts are appreciated!
M37Posted: 27 September 2017Last Updated: 02 October 2017
Yes , this topic has been discussed extensively. And yes, the search engine still exists. But maybe new owners of Supernait 2 might want to share their experience? "500 hours" has often been referred to as a turning point. S o once again... is this the case or is this " perceived harshness " infact the revelaing of source, speakers or room acoustics ... or is it simply a character trait?
ken cPosted: 27 September 2017Last Updated: 01 October 2017
had a frightening experience a few months ago when i experienced a huge shock when the 552 discharged the electrostatic buildup on its case -- all the buttons on the 552 panel lit up -- no sound. Power cycle -- and then the lights were normal again. has anyone else ever experienced this? did you find the cause? how did you fix it? etc etc... enjoy ken
ok8888Posted: 29 September 2017Last Updated: 01 October 2017
My old ndx is about 5 years old .it’s display was got dark and never get bright again. We kown our old notebook’s display is always can get it work ,why ndx’s ?
JoppePosted: 16 September 2017Last Updated: 01 October 2017
I had a demo of Magico S1 mk2 in a non Naim system and they impressed with its neutrality, control and resolution. Possibly they lacked some scale and "smoothness", but still impressed with its strong points for me to consider a home demo. Anybody on the forum who own or auditioned these speakers and are willing to share your experiences? (My system is cds3/lp12/252/300)
Johnny5Posted: 01 October 2017Last Updated: 01 October 2017
anybody use the supernait 2 as a preamp for the nap 250dr like to know your thoughts on this.
NJBPosted: 22 July 2017Last Updated: 01 October 2017
I am running Dynaudio Focus 160s for my 282/200. I love them and they work well in my room. It is a long shot, but has anybody compared the Focus 160s to the new Special 40s? The drives are a slight upgrade, on paper, but is the end result a marked improvement or barely discernible? They are a bit more affordable than the Contour 20s, although the Contours do look stunning....
Mr PawsPosted: 25 September 2017Last Updated: 30 September 2017
Hi to all, I'm thinking of buying a second hand Naim Uniti which is around 7 years old but it has 24/192khz printed near the Ethernet socket so does that mean it's had a 24/192 upgrade? I'm told it has been back to Naim for an upgrade so it can run the latest Naim App. Cheers Guys ��
sunbeamglsPosted: 29 September 2017Last Updated: 30 September 2017
Has anyone tried these under their speakers? Similar concept to Townsend bars / platforms but using some kind of elastomer type isolation rather than springs. Seemed to do a good job on the Sopra 2s, if the switching between speakers was all above board in terms of electronics and volume levels in the demo at Indulgence today.
Sloop John BPosted: 26 July 2017Last Updated: 30 September 2017
i can't believe that the atom is now in the wild and posts berating Naim still seem more active. Surley there are quite a few of you that have sound waves dancing operatically around your rooms which started their lives being shunted through Ethernet to the atom. And they sound like? and the app works like? and chromecast ( my money is on this causing the delays) how does it function/sound? ssshh has anyone tried to see if Roon "sees the atom" ? dont be bashful.
Bob the BuilderPosted: 19 September 2017Last Updated: 30 September 2017
I have a carpeted suspended wooden floor and so put Granite slabs under my Dynaudio floorstanders to protect the carpet and to try and help tune the bass. This morning because I couldn't get at the dust beneath the speaker's I lifted the speakers off and and then decided to try the system without the Granite and got a very pleasant surprise better clarity and separation it is as if the Granite deadened the sound a bit.
mikeybabyPosted: 28 September 2017Last Updated: 30 September 2017
I am currently using a passive pre with an old Chrome Bumper 250 amp. It sounds stunning. I hate not having a Naim preamp on my rack but it is alive with warmth, speed dynamics, and attack. It has replaced my 32.5 Hicap DR. I am totally dumbfounded. It sounds like a Nait5i-2 on mega steroids. Am I hallucinating? System is Nap 250,Rega DAC Sony B-ray,SBLs,NacA5
SS250Posted: 18 September 2017Last Updated: 30 September 2017
I understand that both of these excellent pre amplifiers have their individual strengths and weaknesses. But am kindly asking the experienced ears to clarify the key attributes & points of difference for each; when coupled with a NAP 250 DR and the alternative power supply options on offer. I am intending to use either with an LP12 as primary source, with (Ekos SE/Keel/Radikal/Urika). I am boosting the amplification from a Supernait 2 and my Hi Cap DR, with Sonus Faber Guarneri Memento...
diggygunPosted: 24 September 2017Last Updated: 29 September 2017
Hi all. As you can see, I have a NAC 152 XS pre amp, this has Flatcap XS which also powers the CD5 XS CDplayer. The power amp is the NAP 155 XS. Naim state that the Headline can't be used with the 152 XS, which nay be too much to spend for my needs. My query is, what headphone amplifier can be used with the 152XS and how are they connected to the 152XS as there are no tape sockets i was contemplating getting some Senheisser wireless headphone with a transmitter base station as if I get...
tonycurran1Posted: 25 September 2017Last Updated: 29 September 2017
my friend has just bought a unity core with Naim DAC and 555ps he asked me if this was a good set up i don’t know as I have the NDS and never tried the Naim DAC any advice please.
Bob the BuilderPosted: 27 September 2017Last Updated: 29 September 2017
First impressions of 282/300 set up on Hutter Rack with a wall shelved LP12 are very, very good the 300 takes much better control of the speakers even at low volumes. It is quite different compared to the 250-2 with improvements I've usually come to expect from a source or pre amp upgrade and you get the feeling it is making the very best of the signal it is given. This is a very fast amp and comparisons with the 200 are understandable but with that speed comes more rhythm that combined with...
rmatosevPosted: 26 September 2017Last Updated: 29 September 2017
Hi, does anyone have any experience with this relatively new product? I just love when company advertise the new product with: The world does not necessarily need more speaker cable. Not to mention more magical thinking that tends to surround these mysterious conveyors of electromagnetic pulses that we perceive as sound. But when our engineers decided to create the Guru Solid speaker cable, it was because they were unable to find precisely what they were looking for. It is not expensive and...
milpaiPosted: 22 September 2017Last Updated: 28 September 2017
Hello All, I have decided to go with ProAc loudspeakers for my room. I know that people here have quite some experience with ProAcs in their room and hence seeking their opinion. My room is 15' X 18' X 8'. This is a dedicated room with some room treatment. The current speaker positions are 5 1/2 feet from back wall and 3 1/2 feet from side wall. I can do 6 feet from back wall and 4 feet from side wall. With this configuration, which of the ProAc - D48R OR D30RS - work best in the room...
FredbredPosted: 20 September 2017Last Updated: 28 September 2017
Total newbie to quality hifi taking my first tentative steps and I’ve just purchased a Uniti Atom. It’s currently paired with Zensor 1’s (previously paired with a Denon CEOL), and although it sounds ok, I want the best from my new system. I’m now looking to upgrade my speakers, but they MUST be bookshelf size or thereabouts. So far, I’ve listened to Totem Mites and Kef LS50’s but just didn’t feel either was a good pairing. I have Dynaudio Emit M10’s on my list to listen to next, but was...
sharikPosted: 28 September 2017Last Updated: 28 September 2017
does it protect the preamp when activated or i shouldn't bother using this mode between listening sessions?
ZachrisPosted: 25 September 2017Last Updated: 27 September 2017
Do you have experiences in pairing Sonus Faber speakers with Naim gear? I have some increasing interest in SF products and keep on thinking whether Supernait 2 would drive the Olympica 2's or not. Any opinions/recommendations?
Bob the BuilderPosted: 18 September 2017Last Updated: 27 September 2017
Hopefully I will be picking up a Nap 300 in the next few days and need advice re placement on my rack. I will have 2 free spaces on my 4 tier Hutter rack for the 300 when it arrives, the other full width shelf will contain my 282 which I believe will be best placed on the top shelf? The bottom shelf which is smaller about 110mm contains a Linn Lingo Lp12 psu and a Dual 3rd party psu that powers my 282. As the 300 will be placed on Fraim glass, cups & balls niether box will fit on the...
eagle3333Posted: 24 July 2017Last Updated: 27 September 2017
I know much has been written on this subject and I don't intend to repeat it. I've cut and pasted all the excellent, if oft-conflicted, info' I've collected from the very useful and informative, previous threads and decided to instal a radial & include a balanced power supply from Airlink - yes Mike is a really helpful chap, as reported. But, I'm enjoying my music so much, just now, I hesitated over whether to bother. Then I tried switching off all the breakers on my CSU save for the...