Hi-Fi Corner
my flash has decided to run amok and keeps turning up the volume on my 52 i changed the batteries, took it apart and used a camera air cleaner on the insides, put it back together and same thing happens. Could fry my tweeters but I caught it in time. Any fix? Can this still be repaired? Suggestions? does naim still have the ability to repair this remote?
Hi all, i've recently been experiencing the magic of the Superline z-airplugs, marred only by RF breakthrough. The solution seems to be the use of capacitative load plugs. I have previously felt that the standard capacitative plugs take some sparkle away from the music, has anyone any experience of using the Airplug versions of the capacitative load and did they find a substantial difference in moving to them from the standard capacitance plugs? Has anyone had success with loading screen...
while there has been much discussion on these recently there has been little in the way of comparisons. All my other upgrades have only one available option ie super cap Dr, 552, 3 x 500's its only the cables that could have more than one possibility looking chiefly at Chord Signature & Sarum and Tellurium Utra Black & Black Diamond Lyndon
According to the Russell K Facebook page, their latest Red 120 compact floorstanding loudspeakers are to be launched at the Bristol Sound & Vision Show 2017. Exciting news for people who have enjoyed Russell K speakers. No other info on the 120's, but if anything like the big Red 150's, then the 120's should be a tantalising prospect. I have to admit, that I’d hoped they were going to launch another set of bookshelf boxes with more scope for close to / on wall placement. For those lucky...
Hi at all, I bought an Nait XS (60 watts/8 Ohm), Year 2012, series 322135 - 339631. It has already a HDD-Connection and the frontpanel is brushed like the XS2 frontpanel. Is this an advanced XS series before they launched the XS2 in 2013? The label on the original package mentions "XS-2" but it´s not mentioned on the back side of the amp. If yes, what else has been modified then? Thanks at all for any comment. Regards, Rob
Hello all. My system is: • CD5x • 202 • 150x • NAPSC (powering pre) • Flatcap 2x (powering CD and pre) • Linn Katans • Naim NAC A5 • Standard Naim interconnects • Headline 2 and i-Supply • Sennheiser HD 280 • I am about to buy a 200 - possibly the DR. If I do get the DR, I was thinking about then moving one of the FC outputs from the 202 to the Headline (using a new SLIC). I'm assuming this should improve the Headline performance, right? In the meantime, and to enable me to hear what sort of...
Hi all. I know an 82 from the UK will work in North America with a standard hicap, but what about the napsc?. Will I need to convert the voltage ?
I'm sure I don't need to remind most of you but last November my old system was stolen in a burglary. Well the new system is in and singing beautifully, and is a phenomenal improvement over my old one. Question is, where am I hearing the improvement from? The old '282 was approaching 12 years old, no doubt some improvements in the design and components over time, the hicap2 and '250.2 are now both DR versions and we all know about the improvements there, the NDX was only 4 years old so no...
I got my second hand SN2 5 days ago. When first connected I thought my speakers was damaged. I had a mishap with the AV input upon powering on. Speakers sounded at first tame with little dynamics. This has improved during the past days, but after 4-5 days I still lack some details compared to the SN1. The treble details is better, but the lower mid-range details is a little hidden by heavier bass than the SN1. I had similar experience with connecting a HiCap DR to my SN1. Could it be that...
Thinking about going from my Nait Xs amplifier to a Supernait to be used with a Cd XS and PMC twenty 21 speakers. Is it a worthwhile upgrade in cost and sound ?
I'm wondering what, if any, are the differences are between the Atom and the Nova, apart from the latter having twice the wattage? It seems the rest of the components are identical, so theoretically they should sound more or less the same at similar volumes - would that be correct?
Hi, I have had a Nap 100 for a while on a Linn Pre-amp but I have just acquired a Nac 72 which i hope to swap to. But i have a 4 pin SNAIC cable and the link plug in the 'hi-cap' socket but I still have not audio. Can the Nac 72 be run without a Hi-Cap? Can the Nac 72 and Nap 100 be used together? Thanks you.
Being the first day into 2017, and currently enjoying the new tunes my updated power amp is making, I thought I'd share my recent experiences from my 500DR service and upgrade. October 2016: After much deliberation over "if" and then "when" I should take my 12yr old baby for the service and DR upgrade, they were picked up by my north London dealer of many a year - Grahams. As a tie-me-over for the ensuing weeks, I was given a NAP300(non DR) on loan which was a wonderful gesture by my dealer...
Hi, loving my Cd5si one question to users when i play a cd and it ends then comes to stop/rest i hear one slight only way to describe it is a clunk is this normal? Many thanks
Has anyone on this forum heard the newer Kef Reference 5 speaker against the Naim Older Model NBL's as I was wanting some feedback as to the pros and cons of each speaker. Is the detail more significant on the newer Kef 5 speakers as they have the latest materials used to date and technology known to speaker design must be more advanced, "one would like to think"! Do the Kef 5's need more room to breathe or do they work well in a 20ftx13ft room with lowish ceilings or do they need Victorian...
Is it possible to know the right fuse from Littelfuse catalog for a CDX2 that has a T 1.6 A (slow blow) ? I saw there are two series : 213 and 219 ( code : 21301.6MXP and 21901.6MXAP) ; the first one has an Interrupting Rating of 35A@250VAC , the second one has an Interrupting Rating of 150A@250VAC . Which one is the right one? Thanks for suggestion.
My SN2 seems to be ignoring both of my remotes, which happily control other units. Sensor issues? Can it be 'reset'?
Hi,I'm having a bit of trouble trying to get my channels correct. My 135's are from 88 as far as I know they are the last CB's (dressed in olive now) Standing from the back, I have the bottom 135 as the right hand channel the red cord into the right side XLR plug (looking from the back) and that goes up to SC far right din, on second from the bottom level of my rack is the other 135, that has the green cord coming from the left side XLR which heads up to the din just to the left of the other...
Can somebody advise about (or send me a link to) which of the Naim pre-amps has a proper phono input (ie with RIAA equalization). I am looking to upgrade/modernize from a chrome bumper HiCap/NAC32.5, which performs well, but (how can I put it delicately) looks a bit "dated" and clashes with the UnitiQute/Nap100 that I have recently acquired.
HI, I am new in this forum. I have purchased Naim NAP 300 DR and NAC N 272 /555 PS DR/ CORE/ PMC twenty.26. At present my speaker cable is Nordost Blue Heaven, which as per me is very thin, not fluidic.I have just borrowed Audioquest Aspen speaker cable from my friend. After connecting the sound totally transformed. Now it appears, the amp and PMCtwenty.26 speaker are in booster dose. Have anybody on this forum has experience of Audioquest aspen speaker cable. Whether it will be ok for...
Hello all My system is described in my signature below. Would a 200 be a suitable upgrade for my system? And if so, would it be a straight swap for the 150x (ie same connections, same cables etc)? Thanks! Matt
There is a thread from 2014 regarding this. Wondering if any new insights/comparisons between these speakers since then...
can anyone explain after spending £££ on a full loom why there are no jumpers available. most people who have reasonable sized speakers will have either two or three sets of posts yet there are no jumpers!!! come on naim sort it out in the meantime does anyone have any suggestions
I want to replace the 100 that is currently backing a V-1/72/hicap front end with an olive 140. They're hard to find in the States but there seem to be plenty of them floating around on U.K. auction sites. Do olive 140s have re-wirable transformers? The implication seems to be that if the transformer is re-wirable, the voltage conversion is significantly cheaper than if the entire transformer needs to be replaced. Thanks
hi folks, is the a way to set the inputs on a 552 without a remote? I have just collected my 552 from being serviced and can't get any sound from my LP12 and from memory I need to set the phone inputs.... i could wait until my dealer is about but of there is a fix I can do now that would be really helpful. cheers Gary