Hi-Fi Corner

Tony2011Posted: 12 January 2017Last Updated: 13 January 2017
Just seen a clip of La La Land and was curious about the TT. Classic A&R TT if not mistaken?!
Plant PotPosted: 10 January 2017Last Updated: 13 January 2017
I currently have an ND5 XS/112/150/Flatcap 2 setup but after a fortunate turn of events I have the opportunity to go down one of the following routes (ex-demo):- 1. Get a NAC 272 to replace my 112 - with a view to replacing the 150 in due course. 2. Get a 152 and 155 to replace my 112/150 and work with the ND5 - I quite like the idea of having a full XS system but is this a side-ways step. Both options would probably cost a similar amount with my current equipment thrown in. The obvious...
Worcester WheelerPosted: 13 January 2017Last Updated: 13 January 2017
Simple question - what is the unmarked 4 pin socket to the extreme right on the rear of a NAC42 preamp? I have recently moved my aged system ( NAC42 , Snaps, Nap 140, CD 3.5 and LP 12) to another room as I hadn't really used it for years. On replugging all cables etc which took a while to figure, I noticed this extra output and didn't know what it was. Can anyone enlighten me? Thanks.
jon hPosted: 30 December 2016Last Updated: 13 January 2017
just been poking around the input boards on my nac52 - couldnt remember what i had fitted when it went back for full service and pots8 etc at the factory a while back looks like all inputs are line level except for the last one which is variable
Peter ThompsonPosted: 08 January 2017Last Updated: 13 January 2017
Current equipment: CD3.5 + Nait5 + Flatcap + Neat Motive SE2 I have PC with a huge FLAC classical music collection, currently using Lexicon Alpha soundcard to Nait 5 , sounds pretty good. Question is , should I buy a better DAC or a stand-alone FLAC player like the Pioneer n50a? Any other options welcome as I know a lot about sound cards for music recording but not a lot about dedicated DAC options
Freddie KeePosted: 10 January 2017Last Updated: 13 January 2017
Guys, my current setup is NDX > XPS2 > 282 > HicapDR > 250DR. Im planning to get a Hugo DAC. Shall I retain the XPS2 on my NDX once I acquire the Hugo? Will it bring any benefits to the NDX as a streamer? Thanks for your advice.
Pedro T.Posted: 11 January 2017Last Updated: 12 January 2017
Hello everybody, I’m a new Naim customer (or should I say enthusiast). I bought a Nait 5si amp and the matching CD5si 7 months ago and very recently a pair of Neat Motive SX2s speakers. This is my main system which I’ve been enjoying very much. Last month I bought an used UnitiQute 2 and a pair of Guru Juniors, also preowned. This is my secondary system which I have in a small living room and that I use mainly to stream Tidal (still on my trial period). Now I’m thinking about buying an used...
PauliePosted: 05 January 2017Last Updated: 12 January 2017
Small world. I see we live in the same province in the same country and have a similar system. Specifically - both with NAIM Superline and RP 10 with an Apheta 2 cart. I read your post on load plugs for this set up and, newbie that I am, still don't understand - to put it in simple terms - what plug goes into what hole. Can you help?
lutyensPosted: 12 January 2017Last Updated: 12 January 2017
The rubber feet on my old but happily used Nac 92 need to be replaced. Any recommendations as to where I might get replacements and can i do it myself or is it a visit to my dealer? I ask as I am moving and will have to seek out a new 'dealer' in due course so being able to do it myself would be much easier! thanks
john sPosted: 11 January 2017Last Updated: 11 January 2017
The overall consensus here seems to be that the superline is OK if powered by a 282, good with a hicap and brilliant with a supercap. Does that alter when connected to a 282 that is itself powered by a hicap i.e. is the performance as good, or nearly as good as with a dedicated hicap?
Mike-BPosted: 07 January 2017Last Updated: 11 January 2017
Norway is going to all DAB+ on 11 Jan. Do we have any Norsk forum'ites to comment on this ???
hifinerdwannabePosted: 11 January 2017Last Updated: 11 January 2017
I would like to connect my Nac A5 speaker cables to a non naim power amp. However, the plugs of the Naca will not fit and I wonder if it is possible to separate the contacts/plugs going in to the amp by sawing through the plastic without destroying the internals of the cables?
Alan johnsonPosted: 07 January 2017Last Updated: 11 January 2017
sent naim an email but I imagine they are closed over the weekend. cds3 if I were to buy one sh how readily available are the parts for repair if something went amiss not just next year but say for the next 10 ?
ok8888Posted: 10 January 2017Last Updated: 10 January 2017
My ndx afraid bought in 2012,it's LCD is getting dark. I contacted my dealer at hongkong,they told me to repair the problem will cost a little money,I estimate the cost will be 10% of brand new ndx cost. if the lcd donot display forever,and i could enjoy music with my ndx,even if it's lcd is down. is it possible to setup ndx without the lcd? thanks paul
ElevensheepPosted: 31 December 2016Last Updated: 10 January 2017
Due to a severe case of upgraditis around Christmas, following extensive demos, and thanks to helpful insights from this forum, I have settled upon a system consisted of Auralic Aries - Hugo TT - NAP 250DR - PMC 20.23. This to my ears was a substantial upgrade over the Mac mini - Hugo - SN2 system I have had over the last 2.5 years. Other options I considered: 1) 272/250DR: Sounded very good, and a combination I could have easily lived with. However, to my ears, the TT / 250DR combination...
tonybabawallaPosted: 10 January 2017Last Updated: 10 January 2017
The CD input has just stopped working - no sound at all. Plug the lead into the Tuner input and it works fine. Has anyone got any ideas about this please?! A NAC 102 is worth about £325 now, and I bet a service is £250 so it doesn't seem worth it. Thank you for any replies given!
grahambatemanPosted: 09 January 2017Last Updated: 10 January 2017
guys. hope this finds you all well. ok I posted on here a couple of weeks ago with a bit of a rant about naim. first up appolgies . I let my head and wallet rule my musical heart. I was saying sonos was the future etc etc. truth is I was in a bad place in my life / relationship , too much wine had been consumed and I felt a little sorry for myself. Appolgies guys , I'm very naim orientated. Done a complete strip down and re build , and have re set the naim sepertaes up !! Truth is I love the...
mikeybabyPosted: 09 January 2017Last Updated: 10 January 2017
I am trying to connect headphones to the tape out on my 202. So I have an adapter-- DIN to 4 RCA (2in and 2out) going into the 202 DIN I thought the "out" would work with my headphones but the "in" worked for a while and now neither one works What am I doing wrong? Thanks
Klout10Posted: 07 January 2017Last Updated: 10 January 2017
Does anyone know if the NAP200 is capable of driving the Totem Forest? Or will it have to be the NAP 250?
Joshua HuangPosted: 09 January 2017Last Updated: 09 January 2017
Just bought a brand new Cambridge Audio CXC CD Transport and connect it to my SuperNait using a less than 10 dollar Coaxial RCA digital cable bought from Amazon, the result is quite pleasant. And I then switched to a toslink cable made by DH Labs, not sure why, I feel I like the Coaxial one better.
Piotr1Posted: 14 October 2016Last Updated: 09 January 2017
Where to buy them? Who can help in this case? I will be grateful for any informations. regards, Piotr
AceonePosted: 04 January 2017Last Updated: 09 January 2017
happy new year to all members on here. What is the best vfm preamp in your opinion.
Richard ChoongPosted: 06 January 2017Last Updated: 09 January 2017
Hi everyone. Can someone please advise if Naim would do custom length powerlines and if so what's the cost? Thanks.
Alan WillbyPosted: 08 January 2017Last Updated: 09 January 2017
Just been away for two weeks during which all components were powered down - and actually my dedicated spur was switched off at the consumer unit as well. In switching everything back on I am blowing the surge fuse in the XPS DR. It does not seem to be the on off switch as on my last attempt I left that on and powered up at the socket with the same result - flash of light from the connection point. So I now have a collection of three blown fuses and not much idea why. Any thoughts
john sPosted: 08 January 2017Last Updated: 09 January 2017
Finally finished adjusting my new SME IV on my Gyrodec - after playing around with the VTA for too long I splashed out on the VTA/Damper kit and that made things much easier. Plug for SME - had a problem fitting the kit as one of the holes on the SME wasn't properly threaded and I thought it might all have to go back, but after talking to the SME service department they loaned the correct size tap (very quickly) and I managed to clear the thread without any problems. Their customer care...