Hi-Fi Corner

Javi A.Posted: 08 August 2016Last Updated: 09 August 2016
Hi to all. Today I was browsing through configuration menus of my superuniti and I discover that in "factory setting" menu the internal temperature of the system is displayed. In my case the internal temp is 42ºC while my room temperature is 26. What value do you have for your unitis units? As mentioned... Model Internal Room SU 42 26 ...Javi
Allan MilnePosted: 07 August 2016Last Updated: 08 August 2016
I'm in a quandry (again!) - the usual one of having an itchy wallet and upgrades calling to me with sweet voices ... but I'm loving my current setup. the trouble is (and I am sure I am not alone in this) that we have all gone through various equipment changes/upgrades and have achieved the 'wow' moments but still we don't know what we don't know - i.e. can our wondrous sound be even better? I listen to mine and just don't get how it might be improved but I'm sure it can and will be ... I...
Martin MorganPosted: 04 August 2016Last Updated: 08 August 2016
hi all , seem to be suffering from a lack of dynamics and gain on my lp12 ,system is lp12 ittok 10 x cartridge feding a72 pre all serviced etc ,any ideas why ,regards
Innocent BystanderPosted: 25 July 2016Last Updated: 07 August 2016
What experience/success do people have with room treatment? What differences have you found from what treatment (with what problems trying to fix)? I have been looking into it, consulting several suppliers, backed up by measurements in-room. My room is about 6.5-7m wide and 7m long, but with two corners cut off and substantial stub walls, and 2.4m high. It is heavily carpeted, has three sofas around the main listening position and another sofa, easy chairs and assorted shelving and and other...
Christopher_MPosted: 30 May 2016Last Updated: 07 August 2016
Hello, Early in the year my CDS3 started getting glitchy. Skipping, a noisy motor, wheezy servos, sometimes missing tracks, sometimes just refusing to play discs at all. I've owned it for two and a bit years, bought used from a Naim dealer. It got progressively worse, so my local dealer sent it off to Naim at the beginning of April. Got it back last week and and it sounds fantastic. I'm hearing stuff I didn't know was there. It's just so much more engaging, more coherent. Until now I could...
ConsciousmessPosted: 06 August 2016Last Updated: 07 August 2016
i haven't thought the maths through in detail, but if the sound improvement was commensurate to the price increase, that is, it was reversed somewhat... Example: NAC 102 to NAC 202 high, NAC 552 to Statement low... What would your present Naim system be?
NaimlessPosted: 04 August 2016Last Updated: 06 August 2016
This may be a stupid question but worth asking anyway. Can anyone confirm which speaker is right or left, or to be more specific looking from the front or the back ????
jameswPosted: 27 July 2016Last Updated: 05 August 2016
I just came across an old post here, and wondered if anyone knows what make/model this rack is, as I think it looks awesome?
JinPosted: 04 August 2016Last Updated: 05 August 2016
My current system is NAC N272 with XPS (no DR) feeding into NAP 250 (non DR) and PMC 23. I will, when funds allow, service and upgrade both XPS and NAP 250 to DR, but can only afford to one now with the other at least 6 months away. Logic tells me to go for XPS DR first. However, I have not heard a NAP 250 DR, but have read in reviews and here about what an amazing transformation DR is for the NAP 250. Any advice would be appreciated. Thanks Jin
TheloniousPosted: 03 August 2016Last Updated: 04 August 2016
NAC 42 has a 5 pin output to hicap... Snaps has a 4 pin input from preamplifier. Do I need a 5 pin to 4 pin Snaic cable?
ken cPosted: 29 July 2016Last Updated: 04 August 2016
don't know whether this belongs here -- but here we go anyhow. in an idle moment -- i started wondering what name i would choose if i was ever in a position to rename the NAP500. Demonstrating my total lack of creativity, i could only come up with 'Thunder'. somehow, i think there would be no need to rename the 'Nait' -- very apt 'name' -- so perhaps left as is. but perhaps 'Spring' for the NAP300? oh dear... just for fun, i would be interested in what alternative name(s) you would choose...
ConsciousmessPosted: 03 August 2016Last Updated: 04 August 2016
As a preamble, reading old forum posts about when new items come out e.g. the CDS3, the 555CD it's amazing to continually notice that the expressions are akin to finding the pot of gold at the end of the rainbow! This is an academic question simply because of the intrigue I have in human nature, so let me lay the premise out. Assume every variable is controlled but ONE and I'll call that ''CLOSENESS TO REALITY''. Room layout, speaker spacing, foam on walls, quality of recording, state of...
sjwPosted: 16 June 2016Last Updated: 04 August 2016
I know I've been a bit lazy ... I've just popped banana plugs at end end of my nana to use with my nap200 and Ovator 400. Is it really worth using the naim plugs at either end and why? thanks
Calum FPosted: 27 July 2016Last Updated: 04 August 2016
Anyone know how long 250 DR's take at the moment ?
ken cPosted: 31 July 2016Last Updated: 04 August 2016
OMG, good old days! things were a lot simpler then! enjoy... ken
RichierooPosted: 03 August 2016Last Updated: 04 August 2016
Hi having recently added a 555ps to a 272 and having amazing results....and knowing the DR regulators influence sound quality dramatically ..... I think naim should now bring out a top end battery psu....a two box unit.....box 1 charging psu and box 2 battery supply ...... name? Statement PS....any thoughts....
WillyPosted: 03 August 2016Last Updated: 03 August 2016
A couple of months ago it became clear that my system was not all that it should be. With hindsight there had been a gradual going downhill up to the point where it fell off a cliff. First indications were a “meh” performance and then a significant increase in surface noise. Initial thoughts were to assume the cartridge (approx. 28 months old) was giving up the ghost but something nagged away in the back of my head (well something in addition to the crap that is normally going on in thereJ)...
Javi A.Posted: 28 July 2016Last Updated: 03 August 2016
Hi to all. I bougth a BW P7 headphones. Their sound is simply great (I know that there are better options but not closed like this). I also buy the original 5 m plug. It is nice not to need extra plugs/cables to reach my sofa. I have the SU under the TV and a quite hidden/difficult to reach. I am thinking on using a DAC/HeadP amp next to my sofa connected via a coax. cable from the SU to the DAC. The instalation cable length will be about 7 meters. Any ideas/sugestion for this...
balma01Posted: 03 August 2016Last Updated: 03 August 2016
Hi, inserting a CD into my UNITI, I just see the msg NO CD on the display. I've tried to use different CDs but the result is always the same, I guess that the mech have failed. I will send it to my dealer as naim suport suggests. I'm just asking if somebody ran into a similar problem and how it was fixed
JamesNPosted: 02 August 2016Last Updated: 02 August 2016
Hi all, i have just ( this afternoon) acquired a very cute little NAC42 for a second system..absolutely immaculate cosmetically, to go with a NAP110/140 when I eventually buy one. i hooked it up to my NAP200 in place of my NAC202 to see A. Whether it works, and B. How it sounds. Well, after fiddling around, I seem to have an issue. I only seem to be getting sound from one channel when the toggle switch is on 'normal' but I get both channels when the switch is on 'monitor'. Is this normal?
mpwPosted: 02 August 2016Last Updated: 02 August 2016
hi anyone using this combo of naim dac v1 + naim nait 5i-2 ? i have a Turntable rig also and since the naim Dac V1 does not have analog inputs, NAP 100 is out of the reckoning. thanks regards mpw
Calum FPosted: 01 August 2016Last Updated: 02 August 2016
I've been scared off changing from 200/202 to 250 DR/202 as nobody on here thinks it's a good idea. I weally, weally want a 250 DR but don't want a 282 so, how does 272/250 DR stack up ? Pre and power almost same price has a certain appeal and I can get decent trade-in on 200/202. I also have CD5XS/DAC/HCDR/NAPSC, thanks
jon_jhPosted: 31 July 2016Last Updated: 01 August 2016
A worthwhile upgrade? Anyone with direct experience? Or should I be aiming for a 555-DR? Maybe both of the above are irrelevant until after a pre-amp upgrade from 202/200/HiCap/NAPSC ? In the very distant future I'd like to get to 252 level, so less inclined to consider changing my pre-amp for a 282 at present. Just wishful thinking on a Sunday morning!
Calum FPosted: 25 July 2016Last Updated: 01 August 2016
I have a 200 (non-DR) / HCDR / NAPSC and have ruled out going to 200 DR as I have HCDR. But what about dropping in 250 DR for 200 which I understand can be a straight swap? My immediate thoughts are then 202 will be letting the side down but the 252 is a non-starter. Anyone care to bring me back down to earth?
silkleePosted: 30 July 2016Last Updated: 01 August 2016
Just got myself a preloved LP12 w the Naim Aro (w Rubikon and the tiger sKale) Can I check if the Aro comes an azimuth nut. I can't find the azimuth nut (if there is supposed to be one) on mine. Also when mounted with a dynavector 20x2, it seems that the antiskate is off even when the bias weight is placed on the outer most ring on the antiskate shaft. Had to use a bit of blutack to add some weight to the bias weight. Is there a heavier bias weight or some other way around it other than...