Hi-Fi Corner

Matthew JohnsPosted: 16 January 2018Last Updated: 19 January 2018
hi all been reading up on this but as ever interested in peoples opinions on this as ever local dealer (curse the man) tempting me with damn good offer on either a 282 or SC DR so thoughts are what would a better performance boost either adding a SC DR to the SN2 (i really liked what my hiCAP DR brought when i added that) OR adding a 282 to the SN2 and using it as a power amp (till back end of year when would bring in a 250DR to replace the SN2) OR slight variation to above, could look at...
999inmydreams666Posted: 17 January 2018Last Updated: 18 January 2018
Hello ! I am about to rebuild my entire system. Currently I have a brand new SUPERNAIT2 as my first naim product + B&W cm9 from my old setup +sunfure subwoofer hrs12 and pc+ dac as a source and nordost red dawn main + interconnect+ speaker cables . How do the atc match with supernait2 ?? The room is a lil less than 20sq meters and I am really tired of boomy cm9 so I have a dspeaker antimode as a dac/processor to eq range up to 100hz (there was no other way to clean up that boom so even...
CliffhPosted: 17 January 2018Last Updated: 18 January 2018
For the last 20 years or so, my system has been CD3 - NAC 102 - NAP 180 into Proac Response 2.5s. I also have a Manticore Mantra turntable with an AT 150MLX cartridge feeding a Graham Slee Communicator phono amp. It all sits on an Audiophile Base rack. As you can see, I don't tinker much. About 8 months ago, my DAB/FM tuner died and I decided to drag myself into the 21st century by replacing it with a streamer. A quick visit to the Naim shop and, 10 minutes later, I was sent on my way with a...
fordyPosted: 18 January 2018Last Updated: 18 January 2018
I have a Uniti Atom and a NAP 150x that I would like to try together. What cable would I need? Atom has RCA Pre-outs (not DIN) so I don't think I can use any existing cables. What do I need? cheers all
PopeyePosted: 16 January 2018Last Updated: 18 January 2018
Hi all Having recently become the proud owner of the NDX/Supernait2 I am amazed with the performance this combination brings. With this system would you look to save up and add separate power supplies or upgrade my current Kef R500's. I have no problem with the speakers but interested if speakers would be money better spent over power supplies. Also what unit, NDX or Supernait2 would a power supply make the most difference. This is not something that I am looking to do at the moment but when...
crackiePosted: 17 January 2018Last Updated: 18 January 2018
I would like to publicly send a shout out to Naim and specifically to Dan & Mark at Naim HQ. Chris Murphy very kindly facilitated (thank you Chris) a factory tour whilst I was on my UK holiday. i could not have been treated any better, or made feel any more welcome by everyone who I talked to on my tour. I was even offered lunch at the factory cafe !!!!! You very rarely see hospitality like this ( and never from where I come from). The long story short is I would have been just as...
themrockPosted: 14 January 2018Last Updated: 18 January 2018
Someone wrote on Naim Facebook, that if you use the Tellurium, then you can use cable length shorter than 3;5 m, is that correct. I have in my mind, that, if you run a modern black box, that there is no need to run the Naca5 >3:5 m, which i would prefer. My amp is the Nap 300 DR.
jmePosted: 17 January 2018Last Updated: 18 January 2018
Hi all, I currently have a UQ2 & Focal Aria 906. In lounge, around 4x5m firing down the length from a bay window. I mostly use:- Bluetooth function to stream spotify premium from ipad/spotify connect via app (haven't dabbled with tidal yet) iRadio Rega Planar 3 TV Will be adding a NAS in a few months. I am toying with speaker upgrades and have Kudos X2 and ATC SCM11 on my list to try. However, these require more oomph than the UQ2 is able to provide, so looking at getting a Nap 200 (100...
engjooPosted: 17 January 2018Last Updated: 18 January 2018
I have had a 282 for several months. It is usually left powered on but when I am out of country or would not be listening for more than 1 day, I would power it off - includinig NAPSC. The 282 is used with "Display = off" and when should it get powered off and on again, it remembers this but I have noticed that I have noticed for longer period of being switched off, it does not seems to remember that. Is there a specification on this ? How long should the 282 keep its settings when powered off.
Arthur ByePosted: 17 January 2018Last Updated: 17 January 2018
Is there a way to control the analog volume on a Nac 552 through wifi? After having a Nac 272, I am totally smitten with controlling everything through my iPad. Well done Naim! Now I would like that same single control point on my main system (NDS/552/500) The Naim app allows pretty much full control over everything except the volume control with the NDS is there any kind of work around for this? Perhaps some kind of third party wifi remote control re-sending unit? i don't really want to...
StickyPosted: 08 November 2017Last Updated: 17 January 2018
Would someone have any idea how the new Naim Uniti Nova would drive a pair of Harbeth Super HL5 Plus's? I cant find the current rating on the new Nova, so I am having to guess, and I don't have a Nova to try.
n1ikosgiPosted: 15 January 2018Last Updated: 17 January 2018
A rather frustrated owner of 2 qutes. I never truly and fully warmed up to those machines: -First with the intermittent streaming issues I have been facing -mentioned at other posts and no, I don't feel I need to rearrange my house or have special dispensations for Naim when equipment at a fraction of the cost seems to stream perfectly ceteris paribus. -Second a stream -excuse the pun- of upgrades shortly after I purchased them; first a Qute 1 upgrade, then Qute 2 comes out in quick...
vtpcnkPosted: 15 January 2018Last Updated: 17 January 2018
i think i remember reading on the chord company site sometime back that if a biwire cable is used as a single wire - ie all the four strands are combined into two strands in the speaker end - (as they are in the amp end in a traditional biwire cable) - they would out perform a traditional two strand speaker cable. is this right? or did i misunderstand that information? appreciate the insights.
Hifli_PhilPosted: 16 January 2018Last Updated: 17 January 2018
Hi, my first post. I was introduced to Naim a year ago and am very happy with my set up. 202/250, non-Naim PSU, DacV1, stage line, Project debut carbon, speakers ATC SCM7. Music from Mac Bluetooth to V1. Small room 9 x 10 foot. I am looking to upgrade to; 282? Or Uniti 2 to take advantage of built in dac, Bluetooth, and can bi amp speakers. i can find no information as to the quality and level of the internals. Sound quality is vital to me. I listen to predominately female vocals of off the...
BushdolphinPosted: 15 January 2018Last Updated: 16 January 2018
I have an opportunity to move from the US to France. Can I use the NAP 250dr plus N-272 combo without having to revert to a power converter? Hoping to just be able to change the power cord
ayap1Posted: 12 January 2018Last Updated: 16 January 2018
I accidentally hit the mono button and surprise there was no change in sound or SQ.I thought If mono button is engaged then sound would only appear from one speaker (isn't that's what mono means?) but it's not.If there is no change in SQ then why put that button there in the first place? Thanks in advance for educating me. ayap1
gturPosted: 10 January 2018Last Updated: 16 January 2018
Hello, I am a newbie in more ways than one. :) Just cashed in all my chips and got wife's permission for Uniti Nova (she wanted simplicity) and Wilson Audio Sophia 3 speakers. Did a demo at home, with spectacular bass. However the sound was very subdued, even with the NAC A5 speaker cables. The dealer recommended upgrading the power cable and having a dedicated AC line as next steps. In that regard, would you have a recommendation between Naim Power Line (difficult to get *used* in the USA),...
m.paul taylorPosted: 03 December 2017Last Updated: 16 January 2018
Any ideas on a shopping list at about £5k - looking for mid range clarity. Aesthetics, matter, too. Room about 22 by about 14 paul
ROOGPosted: 08 January 2018Last Updated: 16 January 2018
I am finally in a position where by I can use my system, (SuperUniti and PMC 21’s on the manufactures stands), for its intended purpose, rather than simply for quiet back ground listening. So having levelled up the stands with their spikes through the carpet into the hard, concrete screed? below I wondered what I should put between the speaker and the stand. What do others use between the speaker and the stand? I would also be interested to hear of your experiences with other ideas before...
LanesraPosted: 14 January 2018Last Updated: 16 January 2018
I currently have my Linn LP12 sitting on an isolation plinth on the top shelf of my Hi-fi Racks Podium Reference rack. The rack sits on a suspended wooden floor. The LP12 has Trampolin fitted, but the stylus jumps when someone walks across the floor. I’ve therefore decided that I need to wall mount my LP12. What are the current recommendations? The wall is masonry.
065653Posted: 10 December 2017Last Updated: 16 January 2018
Anybody can help on availability of the above now in 12/2017 - from Naim or any sources. Cheers, Thomas
dubidubiPosted: 15 January 2018Last Updated: 16 January 2018
I recently purchased a Naim system. NAP200+NAC202+HiCap2+NAPSC with all Naim interconnects including NAC A5 speaker cables. I have the Harbeth SHL5 (Non Plus). The thing I love about the non-plus version is the sweeter, somewhat darker vocals/midrange. I think the SHL5 Plus sounds little Hi-Fi compare to the SHL5. I used older Marantz, Class D, Class T amps, etc with my SHL5. All pretty good but the PRAT factor of the Naim is something always find very unique. Hence, the purchase. My wife...
lajlajPosted: 28 December 2017Last Updated: 16 January 2018
Hi folks, I've slowly climbed the ladder and now have the following: NAC 252/Supercap NAP 250 DR Naim DAC Dynaudio Audience 50 speakers (eep!) I've had the speakers since I started - student loan helped with that! - and are the last thing to upgrade. I was planning on getting the Dynaudio Confidence C1 - I like the brand and synergy with Naim - but I've started thinking I might be better off getting the Contour C20 and upgrading my power amp for the NAP 300. I'll try to demo in the new year...
t@rmacPosted: 17 December 2017Last Updated: 16 January 2018
Dac v1 + Nap 200 : it's time to upgrade ! I know ....the ideal partner is the 202 , but a voice came to me : Try a 122x , is more open and detalied than the 202 and more important thing it costs half Is it possible ?
PopeyePosted: 14 January 2018Last Updated: 15 January 2018
Hi all Just a quick question and opinion. Are the existing streaming products always likely to be able to work or will they end up obsolete over time. What I mean is, records for instance, cd's and cassettes have a physical means to load into a given player. As technology has changed they have and will still always continue to work and Evan gain popularity in some cases like vinyl. Those of us using streaming products I can't see in 30 years our products still working and us sitting down and...