Hi-Fi Corner

georgecartPosted: 07 December 2017Last Updated: 10 December 2017
Having dreamed of being a Naim owner for many years, a couple of months ago I threw caution to the wind and bought a used Supernait 2 from a Naim dealer, a significant upgrade from my Arcam Solo and my biggest Hi Fi purchase ever. Excitedly I set it up, plugged in my existing speaker cables (Audioquest Slate) and played some of my favourite vinyl on my turntable. It sounded incredible. A couple of years ago I upgraded to a Clearaudio Concept Wood from an entry-level turntable and a veil was...
ChrisBerlinPosted: 16 October 2017Last Updated: 09 December 2017
Hi, it seems that I won't get happy with my new Naim Superline. After the problems with a used Superline, which could not be solved, I've gone for a new Superline. While I've been waiting for the delivery, I got a used Superline from my dealer. Everything was fine, no problems at all and an incredible sound. After waiting about two months I got my new Superline and installed it in the system. It is powered by a HiCap DR and from there it goes into a NAC 272. A few minutes after power on I...
tancredePosted: 08 December 2017Last Updated: 09 December 2017
Dear Naim lovers, I bought a second-hand Hi-line for my 202+hicap / CD5+flatcapXS on ebay but from an authorized dealer. Surprisingly the result was really poor (and i quickly turned back to the original grey cable which proved much better at least in terms of channel separation and even tone balance). Strangely enough, the cable looks fine cosmetically. Recently, a friend of mine lent me an old hi-line: the sound improvement was really great and the difference is so obvious with the cable i...
JozzerPosted: 01 November 2017Last Updated: 09 December 2017
I have bought my source products being Nap 100 & Dac V1 and now need the forum's help on speaker selection. My room is 6m x 5m with the speakers to be positioned on the 5m wall. I would prefer flloorstanding speakers. I am initially looking to audition PMC Twenty 23 and Neat Motive SX1 or SX2. Would be willing to look at second hand speakers as well. I want a detailed sound that won't tire me out after a couple of hours. Your expert help would be very much appreciated and I've checked...
tonybabawallaPosted: 06 December 2017Last Updated: 08 December 2017
I have a nice system - Audiolab 8200CD mainly used as a DAC from laptop, NAC202 / NAPS-C2 /Hi Cap DR, NAP155XS into Kudos C2 speakers. I bought a used, recently serviced NAP200 as it's the 'natural partner' for the preamp. Yes it's better than the 155XS in some ways (bass, fuller sound) but it's too smooth, so rock just sounds soft with no edge. This is partly caused by my age (nearly 60) so my hearing is tailing off. To get the NAP 200 to sound good I have to turn it way up to 10 o'clock...
CollPosted: 06 December 2017Last Updated: 08 December 2017
What is the minimum speaker impedance that can be used with this unit. The reason I ask is that I am thinking of pairing it with some speakers that drop to 3 ins between 150 to 1000 hz.
GuyCaballeroPosted: 05 December 2017Last Updated: 08 December 2017
As previously mentioned I have a loose plan to upgrade a chunk of the system in the new year/next summer. First up will be a Supernait 2 & then some speakers. The current set up is a: Nait XS 2, B & W CM6 S2, Audioquest bi wired Rocket 88's, CD5X coupled to a Flatcap 2 that also powers a Stageline (moving coil) & Rega PS2 with an Ortofon 2M Bronze needle. I recently had a chance to audition a pair of PMC twenty5.24 which were quite amazing especially when you consider they're a 2...
leni vPosted: 07 December 2017Last Updated: 08 December 2017
Does a late nac 72 version with cd input has a better SQ with cd replay then its earlier version. Leni
TallanPosted: 07 December 2017Last Updated: 07 December 2017
Oh joy, oh rapture: instead of working on developing the mythical unicorn-like 372 or updating the NDS or doing other valuable research we learn that Naim will be designing audio systems for yachts, of all things. Princess Yachts. Egad and cor' blimey. Here's a thought, Naim: put the Muso and Qb into teak enclosures mark them up 50% and call it problem solved!
Mort2kPosted: 03 December 2017Last Updated: 07 December 2017
Evening All Following on from testing active SBL this weekend some additional question have arose around rack placement and box count. Two options present themselves for consideration. First - Single Stack of Fraim - Base + 6 Standard Shelves (max as per manual) comprising 52 HiCap/SNAXO NDX SuperCap 250DR 250DR XPSDR This option works best in the room but is not ideal in having such a large stack. This option also removes the option of a future SuperCap on the SNAXO which i read is a...
RictoPosted: 01 December 2017Last Updated: 07 December 2017
SO I waited nearly 8 weeks for my new XPS DR I am going to give my thoughts so far. System Naim NAC 272 Naim 250 DR New XPS DR Focal 1028 BE speakers with naim nasa speaker wire. Plugging in and listening to the first song I couldn't tell any difference. After 10 songs I started to notice a very slight difference but nothing to put my finger on apart from the bass was cleaner. After 2 hours I listened to Eric Clapton Tears In Heaven MTV edition now this was completely different in every way...
mogulPosted: 06 December 2017Last Updated: 07 December 2017
I have been immersed in the world of hifi and Naim for many years and have owned many different components. I needed very little support but when I did, an email to headquarters took care of it. More recently I installed a Unitiserve and needed more extensive technical support to rip my cd collection to a NAS. I then acquired an ND5XS and needed more help, particularly with the metadata. In both cases, Phil at headquarters referred me to Eric at Plurison. For those not familiar. Plurison...
LewisPosted: 21 November 2017Last Updated: 07 December 2017
I wanted to check how long the little 'fishing line' with a weight at the end should be. The reason I ask is because I recently saw a friends Aro, and his line weight actually sat on the arm board when the arm was in place on the arm rest? He also had the line set on the last 'notch' of the Aro (outer end towards the left side when looking from above). My line is quite a bit shorter than his and does not touch the arm board when the arm is on the arm rest. Also I have to have it set on the...
MesakPosted: 05 December 2017Last Updated: 07 December 2017
I had a good life. I was bug free playing lots of music. Basic and magic system. Unity 2 with Powerline and Neat Motive SX2 with NACA5. Synergy. Once set right in the room (which takes time and places) very enjoyable and foot tapping. Always can come for some more. Never fatiguing and always exciting. Record after a record. And then I have got a Linn Klout and hooked it as a power switching off the power on Naim. The mess has started. It is not an obvious upgrade. it is different but not...
Sister RayPosted: 06 December 2017Last Updated: 06 December 2017
Anyone know if there are USBC to to mini USB cables available that will allow me to plug a MacBook Pro directly into a 2Qute?
Mike-BPosted: 28 October 2017Last Updated: 06 December 2017
RAJAR have just released the latest UK radio listening trends for Q3 2017. I've shown Q3 2016 compared to Q3 2017 Q3 2016 Q3 2017 % Change FM/AM % 54.5 51.2 -6.1% DAB % 32.3 35.9 11.1% DTV % 5.2 5.4 3.8% OnLine % 8.0 8.0 0.0% The move from FM to Digital continues. OnLine (web/mobile) is flat but had a 0.8% decline compared to Q2 - under that BBC OnLine is up, Commercial Radio OnLine is down. RAJAR don't record specific web-radio listening data such as we have with Naim
RobiwanPosted: 06 December 2017Last Updated: 06 December 2017
Which vinyl album do you use as a test album to finetune VTF cartridge?
slawPosted: 03 December 2017Last Updated: 06 December 2017
Hi There, Do any of you checked an UPS unit as a solution for transformer hum buzz ( polluted electricity is the issue for sure) ? Does it degradate the sound from naim? DC blocker helps but destroys the sound. Did any of you got use to the hum buzz after some time? Many thanks for any help with the problem, Cheers, Slawek
Bob the BuilderPosted: 01 December 2017Last Updated: 06 December 2017
It looks like I have decided on the above Contour S 3.4's as replacement for my X32's. I'm going to have a listen to them on Sunday and make a final choice they are the original 3.4's not the recent LE variant so if they ended up coming home I'll do a small review.
riddsPosted: 25 November 2017Last Updated: 06 December 2017
Hello to all, I have enjoyed for many years my B&W 602 s2s but I would now like to replace with new speakers. Running a Naim Uniti & rega 3 where do most people think I should go next to get the best from my system? Trying to stay under £1200 . Thanks & a merry Xmas to all.
richard999Posted: 03 December 2017Last Updated: 05 December 2017
Currently running a nac202 with hicap and napsc2 with a stage line for my DV20x2. the stage line is powered via aux2 socket and sounds really great but was wondering if putting a hicap on the stage line would bring much of an improvement ?
AceonePosted: 30 November 2017Last Updated: 05 December 2017
Could anyone tell me how good is the preamp on the 272 ,is it as good as 282 or 252 plz .
Matthew JohnsPosted: 04 December 2017Last Updated: 05 December 2017
hi all, been reading with some interest a number of posts relating to the 555ps, which got me thinking (or dreaming maybe a more apt phrase) Interested in people views of what added more to their system: 1) sticking that monster power supply on their source e.g. the 555 ps OR 2) doing the CHORD DAC thing OR 3) moving from an integrated amp to full separate, which in my case would be nac 282 and the legendary 250DR (i would have to do this in 2 stages in my case first stage would probably be...
LarPosted: 04 December 2017Last Updated: 05 December 2017
Hi Folks I have just sold my old 90/92 and replaced with Nait XS (not XS 2) and bought a stageline which is connected through Nait for power supply. I have a Flatcap 2 powering my CD 5 at the moment. Q's Is there any benefit in powering the stageline from the FC rather than the Nait? I am led to believe I will need to buy another interconnect to do the above with a 5 pin/4 pin configuration? These are about another £120.00 so a) is this correct and b) is it worth doing? Any straightforward...
Mort2kPosted: 30 October 2017Last Updated: 05 December 2017
Evening All ’easy’ question ! If not fraim, to support a mid/high end system, then what ? fraim is not an option due to not agreeing with my wife / our room decor (please do an oak shelf Naim) Rob