Hi-Fi Corner

How much ?Posted: 15 November 2017Last Updated: 17 November 2017
I have just recently purchased an a 5 din cable in order to listen to my TV through my hi fi. I have a Naim 202 PRE AMP AND A 200 POWER AMP. Can anyone advise me how to set this up as I have been following the manual and getting nowhere. Cheers Gavin
ThatsNotMyNaimPosted: 16 November 2017Last Updated: 17 November 2017
Hi all, Here is a run down of my last 2 years auditioning in search of the unicorn system. I wrote this up with the view it may help others. I've done it to death (Well, nearly!) MUSIC: Sarah McLachlan Lene Marlin Foo Fighters Incubus Ben Watt Scott McKeon Gavin Degraw Simply Red Roxy Music George Michael Talk Talk The Styke Council Blof (Dutch band - try "Watermakers" or "Ondanks jezelf") Kurt Nilsen Johnny Hates Jazz Enya Duran Duran Fleetwood Mac Usher Justin Bieber Adele Chicane...
The SarflondonboyPosted: 16 November 2017Last Updated: 16 November 2017
Have naim stopped producing speakers
TomSerPosted: 15 November 2017Last Updated: 16 November 2017
Hello, I’m planning to install dedicated mains for my system. I read a few threads regarding this kind of installation. Some invest quite an amount: gold plated fuses, special cables, rhodium plated wall sockets (which is strange because rhodium is a poor conductor), etc. My question is the following: Should I let my electrician use the standard gear (wall socket, cables, mcd) or should I choose specific gear like Furutech wall-sockets etc. ? Considering that what we want is “clean”...
petzhouPosted: 15 November 2017Last Updated: 16 November 2017
Hi I decided to changfe my XS to and XS2. Bought from a well known web site. On arrival it is in an XS2 box but just shows as XS on rear. The serial number is 290787 - which is back to 2010 on Naim check list. Have I been done? Appreciate any comments. Many thanks
john R1Posted: 08 November 2017Last Updated: 16 November 2017
Has anyone had a demo of the uniti star yet, if so what speakers did you try, also can you run a phono stage with the star with other phono stages apart from naims own ones ?
PhacocherePosted: 16 November 2017Last Updated: 16 November 2017
Just bought a used Nait 5i to go with my CD5i, everything sounds quite good except when connecting the two with the SNAIC that came with my CD5i when bought 10 years ago no sound is outputted. No problem when connecting via RCA. Am i missing something (interna jumper switch for instance) or is there a problem with the amp/CDP/cable? Thanks, Seb
Daniel H.Posted: 10 November 2017Last Updated: 15 November 2017
I am looking at possibly upgrading my system. I have a Naim 5i V2 integrated, Rega DAC R and Sonus Faber Venere 2.0 speakers (I will not be changing the speakers). I love my system and I do not find it lacking. I also find that the components have great synergy together. But, I wouldn't mind making it even better. I am not looking to change the sound, but rather keep the same style of sound, and make it even better. I love the Naim sound, and the Rega sound as well. I can buy either the Naim...
NinaPosted: 06 October 2017Last Updated: 15 November 2017
I am interested in trying some sort of Chord Dac Does anyone have any experience of them ? Thanks for any help
nesaPosted: 15 November 2017Last Updated: 15 November 2017
Hi guys, I am new here around but not in Naim, or I think so... I have opportunuity to buy a second-hand nac82 but this piece has a white back panel and there are no marks. I askd the seller about this and he has answerd me that there are a two versions of nac 82: with black back panel and white. Until now, I have never saw somthig like that, but maybe there is a reasonable explanation. What do you think? Cheers Shone
stuartPosted: 11 November 2017Last Updated: 15 November 2017
Just collected 272/250 connected everything up and what do you know - everything working perfectly - and it sounds tremendous. I wanted to thank everyone for all the help and advice. I didn't think I would take the plunge into the streaming pool but so far so good. Also great support from my dealer and my better half who knows her way round a computer. Supposed to getting ready for a gig tonight but struggling to get my backside off the chair.
ArtemisPosted: 13 November 2017Last Updated: 14 November 2017
My office and supporting network gear is wired with UPS protected power sockets. Today, our house cleaner plugged the vacuum cleaner into a UPS socket. A short while later, the UPS protested and I had to do a "hard" reset of the UPS. The network came back up, but my Nova started showing an error that it couldn't detect the network. Surprising, because I was controlling it with the App and with Roon over the wired network. It appeared to be the wireless network that it couldn't see, and no...
NaimAudioPosted: 14 November 2017Last Updated: 14 November 2017
Basically Sound in Norwich are holding The Naim Event on Friday 1st & Saturday 2nd December. The two day event will be structured to allow you the chance to hear the new Uniti range for yourself, but to also choose how you wish to experience and hear what these superb new products have to offer. On Friday 1st December, there will be timed demonstrations/presentations by the Naim team at 3pm, 5pm and 7pm, interspersed with open listening sessions. Members of the Naim team will be here to...
Johnny5Posted: 13 November 2017Last Updated: 13 November 2017
Anybody hear that the fact 8 are having a make over in 2018?
Johnny5Posted: 10 November 2017Last Updated: 13 November 2017
anybody own the nac 282 and what is it like thinking of investing soon.
vilcoPosted: 13 November 2017Last Updated: 13 November 2017
Hello to all, after about many years of perfect operation (never a leap during reading, never an uncertainty, never a mistake) my Naim Cd5 suddenly stopped working. The player lights up, insert the cd, close the block on which the cd is located, but the disc is not read (dashes appear on the display). I tried with several cds, turn it off, turn it on, clean the lens, but I did not solve anything, it seems hopelessly gone: I have the impression that the drive does not turn the CD reading (I...
BenNLCHPosted: 12 November 2017Last Updated: 13 November 2017
Good day all Naim users. i use a Supernait 2 with a NDX, and till now i used the original Din Interlink ( grey one ) of Naim. Yesterday i bought a Full silver DIN hand made Din Interlink, I always thought that full silver is the best you can use, but the sound quality was going down, High tones very clear, very crispy but middle tones almost gone, listening to Dave Brubeck Take five the piano was almost complete gone with the silver cable, Has anybody the same experience, maybe handmade is...
vilcoPosted: 18 October 2017Last Updated: 13 November 2017
Hello, I would like to buy Naim-Audio-Hicap-Olive can I simultaneously power the pre amplifier and the cd player naim? Thanks.
Brian WeistPosted: 12 November 2017Last Updated: 13 November 2017
Finally making it back into the Naim game with great excitement. It's been about 3 years since I reluctantly sold my Nait5i and CD5i. It was the first time I heard Naim and the first time I heard such a great synergy with a combo since my Rotel RA-1062 and RCD-1072. Speakers were and still are Epos ES-11 (now driven by Creek 4040S2). While my current integrated amp (Creek 4040S2) and CD player (Pioneer DV-79Avi) deliver wonderful toe tapping music, it's the speed that is missing. I remember...
MangoMonkeyPosted: 05 November 2017Last Updated: 12 November 2017
[@mention:1566878603992423] Over the years after any change, I've come to the following brain brawn setup - LEFT RIGHT NDS 555 552 552 PSU SPACE 300 PSU 300 SPACE I've also noticed that the NDS and 552 both like to be on the top - but wasn't quite sure how to solve this without the racks looking too lopsided - with spaces and all the right one would be 6 or 7 tall.- and the left would have two boxes .... I tried this yesterday - LEFT RIGHT NAC 552 NDS NAP 300 SPACE SPACE 552 PSU 300 PSU 555...
damy79Posted: 09 November 2017Last Updated: 12 November 2017
Dear all, unfortunately I do not have the possibility to place my black boxes on a dedicated Hi-Fi rack. I have to place them on the furniture already used for TV and other stuff. The furniture is quite big (L 2100 H 520mm D 480mm) made of wood, stable and also full of big books to limit the resonance. I was thinking to use an additional base like bambù and put three soundcare spikes below. Do you have any placement experience with CDX2.2 with additional plate, spikes, eg…?
Rotifer217Posted: 11 November 2017Last Updated: 12 November 2017
Can anyone tell me a few basics about pre-amp/power amp combinations? I have a NAC202 + NAPSC and am looking to get a NAP200DR or NAP200 in the next few months. 1. Is the NAP200DR likely to provide obvious sound quality improvements over the NAP200? 2. Would adding a HiCap2 (non-DR) make obvious improvements to either option? 3. Would adding a HiCap2 (non-DR) make the NAP200DR option redundant and enable me to save money on the power amp by buying a NAP200 rather than a NAP200DR?
Bob the BuilderPosted: 11 November 2017Last Updated: 12 November 2017
I have acquired a pair of Royd Eden as a temporary speaker whilst I sell mine to raise the funds to upgrade and what a fantastic little speaker I don't even have any decent stands yet they are plonked on top of my floor standers (Mrs Bob is loving that look) I cannot believe a speaker that cost £80 could sound so good on the end of a 282/300. I believe that Linn Kan stands go very well with Edens but they are getting quite expensive and as these are temporary speakers I'm not prepared to pay...
Bob the BuilderPosted: 11 November 2017Last Updated: 12 November 2017
In an earlier thread '282' some one asked is 272/555 better than 282/Supercap? This purely a question about pre amps forgetting box count, what would be the better pre amp? I ask because I have a 282 and adding a Supercap is hopefully my next move but as I don't really have a my streaming sorted at the moment would I be better off trading in my 282 it's non Naim psu, my Chord 2Qute adding the money I would have spent on a Supercap and a decent streaming renderer and buying a 272/555? I have...
LanesraPosted: 11 November 2017Last Updated: 12 November 2017
As I have a Hi-fi Racks Ltd solid oak rack, I spent today stripping down my system and tightening all the spikes and rack legs (and dusting!). This meant swapping rack legs around such that the front legs are square to the shelves that they support when the legs are fully tightened. I also swapped the NAP 250 with the 555PS such that the 555PS is now on the bottom shelf of my full-width rack. Let’s just say that the system needed the rebuild as it sounds sublime tonight: PR&T much better...