Home Theatre

Neil GilbertPosted: 31 January 2008Last Updated: 03 February 2008
Following recent changes in my system I find I have Chord Din to RCA Interconnects from the AV2 to non Naim power amps surplus to requirements. Also Din to 4 RCA and 2 RCA for DVDA/SACD.Do they have any other application other than the ones I used...
u5227470736789439Posted: 28 January 2008Last Updated: 31 January 2008
DVD to PCI recently got a quite fine looking Toshiba DVD video player, or at least I saved it from going to the tip!I have an ancient PC which to give you an idea has a Pentium II processor. Is there anyway I can connect the player to the computer...
Neil GilbertPosted: 29 January 2008Last Updated: 29 January 2008
I currently have a Arcam 139 connected to my AV2 but wish to add a HD DVD player.What would be the best connection for 5:1 sound.ThanksNeil
Stuart MPosted: 28 January 2008Last Updated: 29 January 2008
Currently SBL's Front and Centre IBL's as rear.Is it worth adding a rear pair? Because of the room (There's a spiral staircase at the rear in the middle so 6.1 is out) would it make much difference.I know there is little 6.1 or 7.1 stuff out there but...
Dave - Naim KnavePosted: 23 January 2008Last Updated: 26 January 2008
I've recently acquired a pre-owned AV2 on the secondary market and, after some assistance by other forum members (thanks!) have now figured out how to properly connect it to my Nait5i using the Nait's "unity gain" feature. I've benefited greatly from...
Lee BrindleyPosted: 20 January 2008Last Updated: 24 January 2008
Oh no!After 8 or so years our Loewe Xelos has gone pop.First a hissing noise, then the screen kept shrinking in a concave / bow tie shape.Finally it kept switching off - and then the inevitable burning smell. Appears dead!So - replace or repair?...
john R1Posted: 19 January 2008Last Updated: 24 January 2008
got me ps3 yesterday, only got 1 blue-ray film at the moment resident evil extinction, pq seems about the same as my tosh hd-dvd player, my 1 and only game drakes fortune looks and runs very well, it took me ages to get it to output at 1080i, not sure...
BailsPosted: 21 January 2008Last Updated: 24 January 2008
I have a naim system which I currently use for music and am very happy. I want to purchase a sub for home cinema use but do not have the funds (or the room) for a naim sub. As the room is relativately small I was thinking of either the M&K KX10-SF...
mwphotoPosted: 20 January 2008Last Updated: 22 January 2008
Hi folks,I have seen lots of discussion on this, but can't quite figure out what I should do. I have never done anything like this before and would beg your advise before proceeding.I have the above equipment and a good Yamaha AV amp which has...
sundarPosted: 17 January 2008Last Updated: 21 January 2008
HiCan anyone larify if there is an any advantage hooking my NAP150 to drive my front speakers with My NVithanks
Paul ErrickerPosted: 06 January 2008Last Updated: 21 January 2008
HiSystem : AV = DVD5+AV2+V175 Hi-fi = NAT05 + NAC202 + NAP200 All go to Totem speakers (Currently DVD5 being used as CD and DVD source)I have my Naim AV system working with my Naim hi-fi and want to consider a interconnect upgrade. The AV2 connects to...
Billy RubinPosted: 20 January 2008Last Updated: 21 January 2008
AV2 connected to Pioneer BR player via coax digital and to Apple Airport Express via Toslink.Very different gains between the two sources.When watching, for example, a DVD DD soundtrack, AV2 volume is typically at 75 - 80 whereas a volume level of 45...
cimmanPosted: 03 January 2008Last Updated: 20 January 2008
I'm using the 140 for my stereo music and they suffice. However, when I'm using it for movies, they seem underpowered. Just don't have the ommph.. and it's not loud enough even at 0db levels.Most HT amps are rated 100 watts and above, typically 150...
chaliapinPosted: 15 January 2008Last Updated: 19 January 2008
Morning, all. I've just been looking at Ofcom's website and they seem to be suggesting at www.ofcom.org.uk/consult/condocs/dttfuture/ that we're all going to need a new set top box in order to enjoy HD on Freeview. It's only a consultation but Ofcom's...
David Hobbs-MallyonPosted: 15 January 2008Last Updated: 18 January 2008
OK - this is hopefully a very basic AV question.I have a Sony DVD/HDD recorder that I'd like to connect to my Naim System to replay 2-channel audio on my old Sony TV The connection to the Naim preamp will be via a DIN/Phono connector into the Sony...
YetizonePosted: 28 December 2007Last Updated: 17 January 2008
Hi folks,I'm starting to do a little research into the new hi definition av formats (BlueRay and HD) and as yet I am still a little confused as to which one is considered the best choice.Does anyone know which of the new high definition formats are...
Richard AdamsPosted: 18 December 2007Last Updated: 17 January 2008
Good evening all, and I hope you don't mind me picking your collective brains for some surround speaker advice.I have recently added to my 2 channel system and am looking to develop a full 5.1 surround system. I don't watch many movies, possibly 1 - 2...
Neill FergusonPosted: 15 January 2008Last Updated: 16 January 2008
all not been on for a while changed job and the computer got virus. I bought before christmas a 46" LCD tv it came with a free blu ray player.So i plugged it in and bought a few titles i wasnt expecting much improvement over the dvd5 i set it up to...
iknowwarrenPosted: 14 January 2008Last Updated: 16 January 2008
I have been using the AV2 for a year now and had no problems at all until last week. Now I am getting no signal from Coaxial Digital input #1. All I get is just get no signal flash up and 3 flashing bars and no audio but if I put it in Coaxial Digital...
Roy DonaldsonPosted: 16 December 2007Last Updated: 14 January 2008
Hi there,Reading a bit more and people are seeming to suggest that going from a 5.1 analog output to a 5.1 analog input, the LFE channel would be reduced by 10db as part of the standard ?and that it should be in the procesor that could compensate for...
{OdS}Posted: 07 January 2008Last Updated: 14 January 2008
I guess the title says it all...! From AnandTech.com:"Pioneer showed off an impressive prototype 9mm thick 50" plasma at their booth at this year's CES. We've seen a lot of thin LCD and OLED displays on the show floor, but this plasma is very...
BigH47Posted: 30 November 2007Last Updated: 14 January 2008
In an attempt to clear some space between my speakers I wish to replace my 32" Thompson CRT. A 32" panel will be fine max width 80(ish) cm not looking to get HD box yet (if at all) internal freeview and or HD if possible.Does any one make/model fit...
meaculpaPosted: 08 December 2007Last Updated: 09 January 2008
I want to uset he DAB/FM module of my n-vi, but cannot have any more wall sockets, cable runs or channeling to allow me to use an external or loft ariel! My dealer has suggested I try a D&M indoor DAB antenna, whish I have, but still no joy on DAB or FM. With DAB I get no signal, and FM between 6-18% on some channels, but not enough to get a station. Does anybody have any other suggestions, or am I not really going to be able to solve this one without a loft, or external ariel. Thanks in...
ToekneePosted: 03 January 2008Last Updated: 08 January 2008
Hi All, I am in the process of setting up a NEVO SL courtesy of EBAY. Although my sold "As New" device has a nasty crack on the top :-( . To the point is there a way of issuing a discrete power on and power off code for the N-Vi that I can teach the...
MarganPosted: 03 January 2008Last Updated: 07 January 2008
I have updated to the latest n-Vi firmware version (0.189.5.6/DVc02-13). Apart from the problem I had to carry the n-Vi to my dealer because an internal video setting was changed and the picture was dark and shifted, I AM STILL NOT CONTENT!Yes, the...