Streaming Audio

Luis_PTPosted: 13 November 2013Last Updated: 14 November 2013
It makes any sense to connect a NAS Synology (214Play to a Naim DAC-V1 by Usb and play the Hi-res music stored in the NAS in the Naim set ( NAS -> DACv1 -> 202 -> 200 -> LoudSpeakers) ? How to choose / control what to play ?  
PenrosePosted: 13 November 2013Last Updated: 14 November 2013
I recently bought an NDX and copied all my cds to FLAC on my ReadyNAS 2 Server, using XLD. Being new to this I neglected to generate any metadata which led to N-Stream not listing Albums as such.Using Metadatics I have now added the metadata and...
ZipperheadbanjoPosted: 13 November 2013Last Updated: 13 November 2013
Just curious how many have issues with gapless playback? I'm running a SuperUniti with firmware 3.21 and have never had issues with gapless... I listen to a lot of live recordings... it's just never been a problem. Is this issue limited to...
R.KPosted: 13 November 2013Last Updated: 13 November 2013
Has anyone any experience of using MusiCHI as a ripper/tagged for classical music?http://www.musichi.eu
Claus-ThoegersenPosted: 13 February 2013Last Updated: 13 November 2013
WiMP one of the smaller streaming services, have announced that they are going to stream in 320 aac format. More or less the same level as Spotify premium, however they are according to this article testing cd quality streaming. For now a closed beta...
bigsplicePosted: 03 November 2013Last Updated: 13 November 2013
Hi, I have £2k to spend and have shortlisted a few naim products. I fully realise and dont need reminding that all possible purchases need to be auditioned. Below is the options, what you think in principle?? option one source: win 8 pc (already owned) amp: dac-v1 + nap 100 option two source: nas drive/ nd5 xs amp: rega brio -r (already owned) i have not put speakers in equation just now as i plan to review these later. i am after opinions based purely on SQ. I will be using ripped cd's and...
skipper44Posted: 11 November 2013Last Updated: 13 November 2013
I've hit the dreaded Fault 28 (Bridgeco boot fail) which seems to hit hard and not leave too many choices . . . cannot even connect to a network. Have  tried unplugging the mains and waiting etc, it worked a couple of times but alas no more. I...
Adrian_PPosted: 13 November 2013Last Updated: 13 November 2013
I changed my WiFi passwords recently and encountered a couple of issues updating the password on the UnitiQute2: There appears to be a length limit on the password you can enter on the Qute. I had to reduce the password length on the network to...
Jude2012Posted: 06 November 2013Last Updated: 12 November 2013
Greetings, My system (Mac Mini, V1, NAP200) gets  its mains power via the standard mains leads and a Merlin Tarantula mains block.  The system also shares this mains block with a TV and Apple TV. I live in the UK. The questions I...
heiheiPosted: 17 September 2013Last Updated: 12 November 2013
I've just upgraded my U/S software to 1.7a and at the same time upgraded the n-serve app on both my imac and macbook pro. Problem is that neither app now works, and simply crashes on opening. Rebooting macs and shutting down U/S doesn't solve the...
Jude2012Posted: 29 October 2013Last Updated: 12 November 2013
I realise that this question has probably been asked before, bit probably not in the context of my system (Mac mini>V1>200>PMC GB1s. I am using Merlin power blocks and Naim supplied mains leads and Chord Epic speaker cables, and a SNAIC. I also...
BENEDICTPosted: 12 November 2013Last Updated: 12 November 2013
Hi, Being the fortunate owner of a new XS 2, is there anybody who could tell me and post a picture of this kind of cinch cable I would need. Thanks beforehand Benedict   
mazePosted: 11 November 2013Last Updated: 11 November 2013
Trying to initiate 322 upgrade to the software on my  nac 172. Downloaded software from naim, so far so good, connect usb from 172 to PC, Naim software asking for appropriate driver. I don't recall the 172 coming with any driver disc. I thought...
skipper44Posted: 11 November 2013Last Updated: 11 November 2013
Any idea if the current Update versions can be used with Mavericks? Also, what about the VCP Driver currently available, is it Mavericks compatible? Should I just trash the downloads and wait? Questions, questions, questions . . ....
NilsPosted: 08 October 2012Last Updated: 11 November 2013
Hi, assume this is quite basic - I am unable to play iTunes playlists from n-stream / iPad after the new version was installed...the playlist are presented ok, but the playback stops after the first song is finished...using iMac and playback upnp.So...
RobbertPosted: 09 November 2013Last Updated: 11 November 2013
Will the superuniti be DAB+ certified? There's a new DAB system here in holland. Will the superuniti be configured for it? Or with a update?
StokieDavePosted: 11 November 2013Last Updated: 11 November 2013
I have a SuperUniti physically wired to a Netgear 5 port switch which streams my music from my Synology 213+ NAS (2 x 2TB config) via a Virgin SuperHub2 (all hardwired Ethernet). Most of the time all is well using ipad 1 client or iPhone 5. However...
heiheiPosted: 09 October 2013Last Updated: 11 November 2013
I recently downloaded the new Goldfrapp album in wav format via the Goldfrapp website. Having transferred it to my NAS drive the U/S sees the album and categorises it correctly alongside other Goldfrapp albums I've ripped from CD. So far so...
rjstainesPosted: 10 November 2013Last Updated: 10 November 2013
I see that Fault 36 hasn't been fixed in release 3.22.   In fact, whereas I had only intermittent Fault 36's with 3.21, so far today I've had four Fault 36 errors  ..and what's more frustrating the standard "wait 30 minutes" doesn't...
LCVPosted: 07 November 2013Last Updated: 10 November 2013
Hi everybody!I have a problem using Twonky in folder navigation mode.When I navigate my library by folder, my folders appear in alphabetical order and this is correct, the problem is that once I select a CD (folder) the tracks order is also...
DwamishPosted: 10 November 2013Last Updated: 10 November 2013
I do not have the time to upgrade every time it is a new version. But when I do it does feel like you need to be working as a PC-professional to find drivers etc. to the mini-usb etc etc. Anyways here are my questions to my Naimfriends1) Can I...
N16SPSPosted: 09 November 2013Last Updated: 10 November 2013
Hi, I'm interested in getting the ND5 XS so that I can listen to radio - internet stations. I know there are two options one with DAB/FM but do I need to connect to the ND with my mac to get internet radio or does it have it's own internal ...
Jon MylesPosted: 20 August 2013Last Updated: 10 November 2013
Sorry, I know this has been addressed on the forum but for the life of me I cannot find it.Is there any particular make/model of RS232 to USB lead needed to implement the latest Uniti firmware upgrade via a Mac?This will be the first time I have...
marcobbPosted: 07 November 2013Last Updated: 09 November 2013
Great !!! Fixed the iRadio 320kbps buffer drop issue on wire connection. 
endlessnessismPosted: 07 November 2013Last Updated: 09 November 2013
Somebody once told me, a propos digital photo files, that every time you opened them on screen they deteriorated ever so slightly.  I don't remember who told me, or when, and it may be complete rubbish.  If, however, there's truth in it, are...